Faithfully reproduce all immersive audio formats in their full glory
The industry's lowest-distortion and noise specifications
The importance of this trait cannot be over-estimated in a theater that may have twenty or thirty speakers in a single room. If each of those speakers were producing even a small amount of noise, it would rapidly become noticeable and unacceptable. This scenario never arises with the Amplitude8m.
Our amplifiers use microprocessor control for turn-on delay and feature an automatic AC power recognition and configuration system. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure.
The Amplitude8m incorporates a new “sleep” circuit. When the amplifier stays idle for a period of more than 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected again on any channel, normal playback operation resumes instantaneously.

AUDIO SPECIFICATIONS
- crosstalk :
- lower than -90dB.
- gain :
- 19dB – Test window is 18.6 to 19.6dB, center is 19.1dB.
- Frequency response :
- +0 , -0.5dB 20-20kHz
- Power Outputs :
- 200 Watts RMS x 8 20-20kHz 0.05% THD+N 8Ω. 300W X4 into 4Ω.
INTELLIGENT POWER
-
Microprocessor :
control for turn-on delay
-
Automatic :
AC Voltage recognition and configuration
-
200RMS/Channel :
@ 8Ω on 8 Ch and 300 RMS/Channel @ 4Ω on any 4 Ch
-
Hypex N-Core :
NC-500 Class D amplifier modules
|
PRISTINE DYNAMIC RENDERING
-
Intermodulation Distortion :
Less than 0.05%
-
Signal-to-noise ratio :
-120dB referenced to rated output.
- Frequency Response :
+0, -.5dB, 5Hz to 20kHz, load independent
POWER SPECIFICATIONS
-
Power Requirement :
min/max VAC / fuse: 117V AC (100V-132V) or 230V (200V-260V); 50/60 Hz Automatically selects proper voltage – 20 Amp fuse for 120V, 12.5 Amp fuse for 230V.
-
Power Consumption :
standby / idle / fully loaded: Less than 0.5W Standby. 80W Idle. 40W Sleep (no audio for 10 minutes). Full power (1kHz into 8ohms @ 200W) 2500VA, 2000W.
WEIGHT & DIMENSIONS
- Weight : lbs / kg : 65 ½ – 29.8kg
-
Dimensions : 17” x 5 7/8” x 15 1/2” (432mm x 150mm x 394mm)
|
