A fully balanced, discrete headphone amplifier with RCA and XLR inputs and four headphone outputs: it delivers up to 1500 mW into 32 ohms from its balanced outputs.
Head Box DS3 B: power and connections
Pro-Ject designed the Head Box DS3 B to drive even difficult headphones. The signal path is balanced from input to output whether you connect by RCA or by XLR, which helps channel separation and keeps noise down. The power stage uses discrete, low-noise parts and reaches 1500 mW into 32 ohms in balanced mode, with 900 mW into 16 ohms and 560 mW into 300 ohms; the minimum headphone impedance allowed is 8 ohms.
Balanced headphones plug into the 4.4 mm Pentaconn socket or the 4-pin XLR, conventional ones into the 3.5 mm and 6.3 mm jacks. Gain is 12 dB from the RCA input and 6 dB from the XLR. An RCA loop output passes the incoming signal on to another component. The enclosure is aluminium throughout, for mechanical stability and screening; the distributor's list also mentions an RS232 port for external control, and power is 18 V DC.
Specifications
- Maximum output: 510 mW into 8 ohms, 900 mW into 16 ohms, 1500 mW into 32 ohms, 560 mW into 300 ohms
- Headphone outputs: 3.5 and 6.3 mm jacks, balanced 4.4 mm Pentaconn, balanced 4-pin XLR
- Signal-to-noise ratio: over 118 dB A-weighted at 1 kHz
- Distortion (THD): below 0.002% at 1 kHz for a 500 mV input
- Crosstalk: better than -83 dB at 10 kHz
- Gain: 12 dB from the RCA input, 6 dB from the XLR input
- Frequency response: 20 Hz to 20 kHz within 0.2 dB
- Analogue inputs: one RCA pair and one XLR pair
- Loop output: one RCA pair
- Headphone impedance: 8 ohms or higher
- Power: 18 V / 1 A DC from a 110-240 V mains adapter; standby under 0.5 W
- Dimensions: 206 x 70 x 194 mm (width, height, depth), 218 mm maximum depth
- Weight: 1430 g, power supply excluded
- Finishes: silver, black