Manual articulated TV bracket with recessed wall box for indoor marine spaces
The PS5531-2S-M pairs a manual service bracket with a recessed wall box and is intended for 55" to 75" screens fitted on board, in interior areas. It lets AV integrators reach the back of the display while the screen stays mounted.
The recessed box lets the television sit flush with the wall and hides the power supply and the connection points behind it. Pulling the cords frees the spring-loaded catches along the top edge; the bracket then comes forward and swivels without restraint, so a technician can get to the display's inputs and outputs and to any AV equipment fixed at the rear.
Key features
- Recommended for screens from 55" to 75"
- Carries up to 60 kg
- Reaches 449 mm out from the wall at most; minimum depth 5 mm
- Swivels as much as 50° to either side, depending on how wide the screen is
- Mounting hole spacing between 100 and 400 mm, horizontally and vertically
- Integrated anchor points for cable ties
- Finished in satin black RAL 9005; other finishes can be requested
Installation
The box is recessed into the wall and measures 760 by 792 by 97 mm. Before the bracket is pushed home again, the cords need to be fixed to the lower rear edge of the screen. Movement is entirely manual; how large a screen can be depends on its weight and on the swivel angle wanted.
Environments
The bracket is suitable for marine use, indoors only, and is not meant for outdoor installation. When servicing is finished, the marine lock keeps the television pressed firmly onto the wall box, and the screen therefore stays still while the vessel is at sea.
