CHR-MO ceiling TV hinge for outdoor and marine use, 40" to 88" screens
CHR-MO is the series of ceiling TV hinges that Future Automation designed for installation outdoors and in marine settings: a motorised mechanism that brings screens between 40" and 88" out from the ceiling, swinging them by as much as 100°.
For outdoor use the mechanism is fitted with perimeter seals, and marine locks are added to keep it firmly shut whenever the television is not being watched. The lower face can take a ceiling panel, so the finish is the same as that of the ceiling around it. CHR-MO units arrive as one piece prepared for installation, with less room for mistakes during fitting.
Key features
- For indoor and outdoor use, suitable for marine installation
- Perimeter seals and marine locks
- Rotation reaching 100°, with a programmable maximum limit
- Limit switches that adjust themselves at the closed position, for faster set-up
- Mechanical and electrical recovery supplied, so the system can be reached safely if the third-party control has a fault
- External IP66 control box, connected by a 3 m loom
- White RAL9910 painted finish, other finishes on request
Available sizes
The sizes are CHR4-MO (50" at most), CHR5-MO (58"), CHR6-MO (65"), CHR7-MO (79") and CHR8-MO (88"). A screen no deeper than 70 mm may measure, in width and height respectively, 1130 × 680, 1330 × 800, 1530 × 920, 1730 × 1010 and 1980 × 1110 mm. For deeper televisions the maximum height drops by 30 mm, with depth reaching 95 mm for CHR4-MO, CHR5-MO and CHR6-MO and 130 mm for CHR7-MO and CHR8-MO.
Load capacity and control
The maximum weight also covers the added ceiling panel: 50 kg for CHR4-MO and 40 kg for CHR5-MO, of which 10 kg at most is panel; 90 kg for CHR6-MO, 150 kg for CHR7-MO and 120 kg for CHR8-MO, of which 30 kg at most is panel. The mechanism weighs roughly 105 to 230 kg. Control is by contact closure, RS232 and IR. The series is also offered in a version with screen swivel.
