Managed power distribution unit with four IEC outlets
The PWR4IEC is a smart PDU that meters consumption and switches each outlet individually, designed to power and remotely manage high-draw equipment inside a rack cabinet.
Power enters through an IEC C14 inlet (110-250 V, up to 10 A) and is shared among four IEC C13 outlets. It measures voltage, current, power and energy, provides scheduling and on/off sequences, overload protection and interference filtering. The four-channel watchdog, available from firmware 1.5.0, checks the device on each outlet via ICMP or TCP and restarts it automatically when it stops responding. It can be operated over TCP/IP or RS-232, from the front buttons or through GPI inputs, the latter handy for automation from control platforms or BMS; the password-protected web interface allows remote access and monitoring.
Key features
- IEC C14 inlet and four IEC C13 outlets, 110-250 V up to 10 A
- Readings for voltage, current, power and energy used
- Scheduling and power-up sequences
- 4-channel watchdog with automatic outlet restart
- Two network ports for continuous access, with SSL connection
- GPI inputs to switch all outlets or a single one
- 1U format for 19" racks, mounting kit included
Connections
At the rear are the IEC C14 inlet, the four IEC outlets, two 3-pin Phoenix terminals for GPI, a 3-pin one for RS-232 and two RJ45 ports. The front carries buttons for the single outlets and a main switch. The housing measures 218 x 153 x 42 mm and weighs 1.2 kg packed.
Box contents
PDU, DB9 to 3-pin Phoenix serial cable, two 3-pin Phoenix plugs, 19" rack kit, shelf or wall brackets, quick reference card and IEC input cable; leads for the output outlets are not supplied.
