Full HD video over IP receiver for 100 Mbps networks
The IP50HD-RX is the receiver of the Contractor series: it takes HDMI video up to 1080p from the network together with control signals and delivers them to a screen up to 100 m away from the switch.
H.265 compression lets it operate on a 100 Mbps network. It can run in unicast on unmanaged networks, in multicast on large managed ones, or as a plain extender wired straight to the transmitter with no switch in between. The built-in scaler adapts the picture to screens with different resolutions. Power is taken over PoE or from a 12 V 1 A adapter that is not included. It fits commercial projects and homes alike.
Key features
- Video output up to 1080p at 60 Hz with integrated scaler
- Two-channel PCM audio, plus a separate stereo analogue output
- Two-way IR, RS-232 and USB 1.1 for KVM, each routed on its own
- HDCP 1.4 compliant, with EDID handling
- Matrix mode (with a 100 Mbps switch) or one-to-one extender mode
- PoE draw of 2.9 W typical and 3.2 W maximum
Connections
The receiver offers one RJ45 port for the network stream, a locking Type A HDMI output, analogue audio on a 3-pin Phoenix terminal and RS-232 on a second 3-pin Phoenix. Two USB Type A ports serve KVM devices; IR uses a 3.5 mm stereo jack for input and a mono one for output. Stated latency is 3 frames.
Box contents
Receiver, IR receiver, IR emitter, mounting kit and four rubber feet. The unit measures 190 x 95 x 25 mm (100 mm deep with connectors) and works between 0 and 40 °C.