Dante interface with two XLR inputs for microphones and line signals
The DA11XLR brings two analogue sources fitted with XLR plugs onto a Dante network: microphones, or line-level signals in balanced or unbalanced form.
Each input offers switchable 48 V phantom power for condenser microphones, together with its own sensitivity control. The unit is powered over PoE by the switch or, when the switch cannot supply it, by a 12 V adapter (PS121PH, sold on its own). Besides Dante it handles AES67 RTP transport, and it is set up from a built-in web page with no extra software. It suits meeting rooms, auditoriums and any installation where microphones and analogue sources must feed a networked audio system.
Key features
- Two 3-pin XLR inputs turned into Dante channels
- 48 V / 0.5 mA phantom power, enabled per microphone input
- Mic or line sensitivity from +24 dBu to -28 dBV on each input
- Sampling at 44.1, 48, 88.2 and 96 kHz, 16, 24 or 32-bit depth
- Dante latency of 2, 3, 4, 5 or 10 ms, chosen in Dante Controller
- Class 0 802.3af PoE or a local 12 V supply
- Internal web interface for settings and control
Technical data
The network side is a single RJ45 port at 100 Mbps; the external adapter plugs into a 2-pin Phoenix terminal (12 V, 1 A). The housing measures 120 x 84 x 40 mm, shipping weight is roughly 0.3 kg and the operating range is 0 to 40 °C. A quick reference guide comes in the box.