Fyne Audio F502S: 2.5-way floorstanding speakers with a 200 mm IsoFlare driver
The F502S is the floorstander at the top of the Fyne Audio F500S Series. The maker suggests it for large rooms. Sold as a pair.
The 200 mm IsoFlare point source unit, whose tweeter has a 25 mm magnesium dome, is joined by a second 200 mm drive unit assigned to the bass and voiced to match it. The multi-fibre cone is held by a FyneFlute surround, which improves the response to transients. The patented BassTrax Tractrix diffuser, built into the cabinet, spreads bass evenly through 360 degrees. The cabinet is made of high-rigidity MDF, and a presence adjustment lets the listener set the midrange to taste.
Key features
- 2.5-way system with a port firing downwards and BassTrax
- 200 mm IsoFlare unit for bass and midrange, with a compression tweeter using a 25 mm magnesium dome
- 200 mm drive unit for the bass
- Presence adjustment: +/- 3 dB between 2.5 and 5.0 kHz
- Cabinet in high-rigidity MDF, extensively braced inside
- Frequency response 30 Hz - 34 kHz (-6 dB, typical in-room figure)
- Sensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 ohm
Technical data
Suggested amplifier power runs from 30 to 180 W RMS; the speaker takes 90 W RMS continuously. The crossover points sit at 250 Hz and 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 1112 x 300 x 382 mm (height x width x depth) and weighs 28.5 kg: both figures refer to a single speaker.
Finishes
The F502S comes in three finishes: Natural Walnut and Black Oak, both in real wood veneer, and Black Piano Gloss.