{"title":"Acoustic speakers","description":"","products":[{"product_id":"diffusori-da-esterno-paradigm-rock-monitor-60sm","title":"Paradigm Rock Monitor 60SM","description":"\u003cp\u003e\u003cstrong\u003eRock Monitor 60SM is a rock-shaped garden loudspeaker that plays both stereo channels from one cabinet: a 165 mm dual voice-coil woofer and two titanium-dome tweeters in a sealed shell that stands up to rain, sun and bad weather.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRock Monitor 60SM: what is inside the rock\u003c\/h2\u003e\n\u003cp\u003eThe Rock Monitor 60SM has separate left and right inputs feeding the two voice coils of its one woofer and a pair of tweeters, one for each channel. A single installation point is therefore enough for the full stereo programme, which helps in a garden where two widely spaced speakers are not practical. It can also be driven in mono: wired that way it suits 4 ohm amplifiers, whereas in stereo each channel presents an 8 ohm load.\u003c\/p\u003e\n\u003cp\u003eThe two PTD tweeters use 25 mm domes of pure titanium, sit coaxially in front of the woofer and are angled by 30° so that a broad listening zone is covered. The 165 mm woofer has an ICP cone of injection-moulded co-polymer polypropylene, a die-cast aluminium basket and an oversized ferrite magnet. A pair of second-order filters cross over at 3.0 kHz; on-axis response stays within ±2 dB between 66 Hz and 20 kHz, and bass extension reaches 44 Hz (DIN).\u003c\/p\u003e\n\u003cp\u003eThe cabinet is PolyGlass with an imitation stone finish: it is fully closed, with no reflex ports, and heavily damped. Grilles are stainless steel, and the fissures in the rock let water run off by themselves. It measures 31.1 × 28.3 × 27.0 cm, weighs 5.5 kg and has a sensitivity of 89 dB, taken as a groundplane figure. Paradigm recommends amplifiers of 15 to 100 W in mono, or 15 to 55 W per channel when wired for stereo.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: one-cabinet speaker with L\/R stereo inputs, 3 drivers, sealed box\u003c\/li\u003e\u003cli\u003eTweeters: two 25 mm PTD titanium domes, coaxial with the woofer\u003c\/li\u003e\u003cli\u003eWoofer: 165 mm ICP cone with twin voice coils, die-cast basket\u003c\/li\u003e\u003cli\u003eCrossover: two electro-acoustic 2nd-order filters, 3.0 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 66 Hz - 20 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 66 Hz - 18 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eBass extension: 44 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 89 dB (groundplane)\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 - 100 W mono; 15 - 55 W per channel stereo\u003c\/li\u003e\u003cli\u003eMaximum input: 70 W mono; 35 W per channel stereo\u003c\/li\u003e\u003cli\u003eImpedance: 4 ohm compatible in mono; 8 ohm per channel in stereo\u003c\/li\u003e\u003cli\u003eCabinet: stone-effect PolyGlass, stainless grilles, draining fissures\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 31.1 × 28.3 × 27.0 cm\u003c\/li\u003e\u003cli\u003eWeight: 5.5 kg\u003c\/li\u003e\u003cli\u003eFinishes: fieldstone, granite\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Fieldstone","offer_id":41671495549117,"sku":"12105713532","price":445.0,"currency_code":"EUR","in_stock":true},{"title":"Granite","offer_id":41671495581885,"sku":"12105713531","price":445.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Rock-Monitor-60-SM_northeastern.jpg?v=1649058399"},{"product_id":"diffusori-da-esterno-paradigm-rock-monitor-80sm","title":"Paradigm Rock Monitor 80-SM","description":"\u003cp\u003e\u003cstrong\u003eRock Monitor 80-SM is Paradigm's rock-shaped speaker with a 190 mm woofer: one sealed outdoor cabinet with stereo inputs, twin voice coils and two titanium-dome tweeters, built to fill a garden with sound from one spot.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRock Monitor 80-SM: the design\u003c\/h2\u003e\n\u003cp\u003eThree drive units work inside the rock of the Rock Monitor 80-SM: a 190 mm woofer with two voice coils, one per channel, and two 25 mm PTD tweeters with pure titanium domes, set on the woofer's axis and splayed by 30°. Left and right channels therefore leave the same cabinet and the treble is spread over a broad area, which is what is needed outdoors where listeners keep moving about.\u003c\/p\u003e\n\u003cp\u003eThe woofer cone is ICP, an injection-moulded co-polymer polypropylene, carried by a die-cast aluminium basket and driven by a large ferrite magnet. Two second-order electro-acoustic filters divide the bands at 2.5 kHz. Quoted on-axis response lies within ±2 dB between 63 Hz and 20 kHz, at 30° off axis it stops at 18 kHz, and bass extension goes down to 42 Hz (DIN). Sensitivity, as a groundplane figure, is 90 dB.\u003c\/p\u003e\n\u003cp\u003eThe PolyGlass shell imitates stone, has no reflex openings and is heavily damped; it withstands bad weather, water and ultraviolet light. Grilles are stainless steel and water drains away through the fissures of the rock. It measures 38.4 × 34.0 × 33.0 cm and weighs 7.7 kg. In mono the load suits 4 ohm amplifiers of 15 to 120 W; in stereo each channel is 8 ohm and the suggested power is 15 to 60 W per channel.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: one-cabinet stereo L\/R speaker with 3 drivers, sealed shell\u003c\/li\u003e\u003cli\u003eTweeters: two 25 mm PTD titanium domes, coaxial\u003c\/li\u003e\u003cli\u003eWoofer: 190 mm ICP cone with twin voice coils, die-cast basket\u003c\/li\u003e\u003cli\u003eCrossover: two electro-acoustic 2nd-order filters, 2.5 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 63 Hz - 20 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 63 Hz - 18 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eBass extension: 42 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 90 dB (groundplane)\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 - 120 W mono; 15 - 60 W per channel stereo\u003c\/li\u003e\u003cli\u003eMaximum input: 80 W mono; 40 W per channel stereo\u003c\/li\u003e\u003cli\u003eImpedance: 4 ohm compatible in mono; 8 ohm per channel in stereo\u003c\/li\u003e\u003cli\u003eCabinet: stone-effect PolyGlass, stainless grilles, draining fissures\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 38.4 × 34.0 × 33.0 cm\u003c\/li\u003e\u003cli\u003eWeight: 7.7 kg\u003c\/li\u003e\u003cli\u003eFinishes: fieldstone, granite\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Fieldstone","offer_id":41671495647421,"sku":"12105714532","price":620.0,"currency_code":"EUR","in_stock":true},{"title":"Granite","offer_id":41671495680189,"sku":"12105714531","price":620.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Rock-Monitor-80-SM-su-videosell-01.jpg?v=1666705693"},{"product_id":"diffusori-da-esterno-paradigm-stylus170","title":"Paradigm Stylus170","description":"\u003cp\u003e\u003cstrong\u003eStylus170 is a compact two-way outdoor loudspeaker, sold as a pair: a 25 mm PTD dome tweeter and a 115 mm ICP cone in a closed PolyGlass cabinet that stands up to bad weather, water and UV light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eStylus170: how it is built\u003c\/h2\u003e\n\u003cp\u003eThe Stylus170 measures 19.7 × 14.3 × 14.0 cm and weighs 1.6 kg, dimensions that let it go where space is tight. Its cabinet is PolyGlass, a material Paradigm rates as resistant to bad weather, water and ultraviolet light, and the loading is acoustic suspension, which means a fully closed box with no reflex ports.\u003c\/p\u003e\n\u003cp\u003eThe two bands are handled by a tweeter with a 25 mm PTD dome and a mid\/bass unit with a 115 mm ICP cone, joined by a third-order electro-acoustic filter at 2.3 kHz. Quoted on-axis response is within ±2 dB between 90 Hz and 20 kHz, and at 30° off axis it holds the same tolerance up to 18 kHz: a figure that matters outdoors, where people seldom sit still in front of the speakers. Bass extension reaches 65 Hz to the DIN standard.\u003c\/p\u003e\n\u003cp\u003eSensitivity is 88 dB and the impedance suits 8 ohm amplifiers. Paradigm suggests 15 to 80 W of amplifier power and a maximum input of 50 W, so an amplifier of modest output is quite enough to drive it properly.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 2-way, 2 drivers, closed-box outdoor speaker\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eTweeter: PTD dome, 25 mm\u003c\/li\u003e\u003cli\u003eMid\/bass unit: ICP cone, 115 mm\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic 3rd order, 2.3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 90 Hz - 20 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 90 Hz - 18 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eBass extension: 65 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 88 dB\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 - 80 W\u003c\/li\u003e\u003cli\u003eMaximum input: 50 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eCabinet: PolyGlass, proof against weather, water and UV\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 19.7 × 14.3 × 14.0 cm\u003c\/li\u003e\u003cli\u003eWeight: 1.6 kg each\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Glossy black","offer_id":41671495778493,"sku":"12105699238","price":310.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671495745725,"sku":"12105699342","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Stylus-170_su-videosell-02.jpg?v=1666710044"},{"product_id":"diffusori-da-esterno-paradigm-stylus270","title":"Paradigm Stylus270","description":"\u003cp\u003e\u003cstrong\u003eStylus270 is a two-way loudspeaker for outdoor use, sold as a pair, with a 140 mm mid\/bass unit and a PTD dome tweeter: a closed PolyGlass cabinet for taking music outside without worrying about rain and sun.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eStylus270: the design\u003c\/h2\u003e\n\u003cp\u003eIn the Stylus270 the mid\/bass unit has a 140 mm ICP cone on a die-cast basket, while the treble goes to a PTD tweeter with a 25 mm dome. The handover between the two takes place at 2.3 kHz through a third-order electro-acoustic filter. Quoted response is held within ±2 dB between 85 Hz and 20 kHz on axis and between 85 Hz and 18 kHz at 30° off axis; bass extension, to the DIN standard, is 60 Hz.\u003c\/p\u003e\n\u003cp\u003eLoading is acoustic suspension: the internal volume is closed and the cabinet has no reflex ports. The shell is PolyGlass, which the maker describes as resistant to bad weather, water and UV light. At 24.1 × 17.8 × 17.8 cm and 3.1 kg it remains an easy speaker to place.\u003c\/p\u003e\n\u003cp\u003eElectrically the Stylus270 has a sensitivity of 90 dB and suits 8 ohm amplifiers; the suggested amplifier power runs from 15 to 90 W. These figures make it a match for most stereo amplifiers and receivers.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 2-way, 2 drivers, closed-box outdoor speaker\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eTweeter: PTD dome, 25 mm\u003c\/li\u003e\u003cli\u003eMid\/bass unit: ICP cone, 140 mm, die-cast basket\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic 3rd order, 2.3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 85 Hz - 20 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 85 Hz - 18 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eBass extension: 60 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 90 dB\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 - 90 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eCabinet: PolyGlass, proof against weather, water and UV\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 24.1 × 17.8 × 17.8 cm\u003c\/li\u003e\u003cli\u003eWeight: 3.1 kg each\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Glossy black","offer_id":41671495844029,"sku":"12105700238","price":475.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671495811261,"sku":"12105700342","price":475.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Stylus-270_su-videosell-02.jpg?v=1666710060"},{"product_id":"diffusori-da-esterno-paradigm-stylus370","title":"Paradigm Stylus370","description":"\u003cp\u003e\u003cstrong\u003eStylus370 is a two-way outdoor loudspeaker with a 165 mm mid\/bass unit, sold as a pair: a closed PolyGlass box proof against the weather and 91 dB sensitivity, for those who want more body on the terrace or in the garden.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eStylus370: drivers and cabinet\u003c\/h2\u003e\n\u003cp\u003eThe Stylus370 pairs a PTD tweeter with a 25 mm dome and a mid\/bass unit with a 165 mm ICP cone on a die-cast basket. A third-order electro-acoustic filter splits the two bands at 2.3 kHz. The result is an on-axis response within ±2 dB between 80 Hz and 20 kHz, which at 30° off axis stays inside the same window up to 18 kHz, with bass extension of 55 Hz (DIN).\u003c\/p\u003e\n\u003cp\u003eThe PolyGlass cabinet is rated as resistant to bad weather, water and ultraviolet light and works as an acoustic suspension design: the woofer loads a closed volume, with no reflex tuning. It measures 27.3 × 19.3 × 18.7 cm and weighs 4.0 kg per speaker.\u003c\/p\u003e\n\u003cp\u003eSensitivity of 91 dB helps to reach a good sound level in the open air even with limited power. The impedance suits 8 ohm amplifiers, suggested power runs from 15 to 100 W and the most that may be fed in is 70 W.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 2-way, 2 drivers, closed-box outdoor speaker\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eTweeter: PTD dome, 25 mm\u003c\/li\u003e\u003cli\u003eMid\/bass unit: ICP cone, 165 mm, die-cast basket\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic 3rd order, 2.3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 80 Hz - 20 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 80 Hz - 18 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eBass extension: 55 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 91 dB\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 - 100 W\u003c\/li\u003e\u003cli\u003eMaximum input: 70 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eCabinet: PolyGlass, proof against weather, water and UV\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 27.3 × 19.3 × 18.7 cm\u003c\/li\u003e\u003cli\u003eWeight: 4.0 kg each\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Glossy black","offer_id":41671495942333,"sku":"12105701238","price":710.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671495909565,"sku":"12105701342","price":710.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Stylus-370_su-videosell-02.jpg?v=1666710075"},{"product_id":"diffusori-da-esterno-paradigm-stylus370sm","title":"Paradigm Stylus 370SM","description":"\u003cp\u003e\u003cstrong\u003eStylus 370SM is an outdoor loudspeaker with stereo inputs, sold singly: each cabinet plays left and right channels through a 165 mm twin-coil woofer and two PTD tweeters, in a closed PolyGlass box.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eStylus 370SM: stereo from one cabinet\u003c\/h2\u003e\n\u003cp\u003eUnlike a conventional loudspeaker, the Stylus 370SM accepts both the left and the right channel. Its 165 mm mid\/bass unit, with ICP cone and die-cast basket, has two voice coils, one per channel, and above it sit two PTD tweeters with 25 mm domes. Each cabinet is therefore a small complete stereo system, suited to places where two boxes cannot be set apart, for instance an outside passage or a narrow porch.\u003c\/p\u003e\n\u003cp\u003eThere are two filters, both third-order electro-acoustic types crossing at 2.3 kHz. On axis the quoted response stays within ±2 dB between 80 Hz and 20 kHz, while at 30° off axis the same tolerance holds up to 15 kHz; bass extension is 55 Hz (DIN) and sensitivity 91 dB. The cabinet is an acoustic suspension design in PolyGlass that resists bad weather, water and UV light, and measures 27.3 × 19.4 × 18.7 cm for 3.8 kg.\u003c\/p\u003e\n\u003cp\u003eIt can be wired in two ways. In stereo each channel presents an 8 ohm compatible load, with suggested power of 15 to 50 W per channel and a ceiling of 35 W per channel. In mono the load becomes 4 ohm compatible, the suggested amplifier runs from 15 to 100 W and the maximum input rises to 70 W.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: one-cabinet speaker with L\/R stereo inputs, 3 drivers, closed box\u003c\/li\u003e\u003cli\u003eSupplied: sold singly\u003c\/li\u003e\u003cli\u003eTweeters: two PTD domes, 25 mm\u003c\/li\u003e\u003cli\u003eMid\/bass unit: 165 mm ICP cone with twin voice coils, die-cast basket\u003c\/li\u003e\u003cli\u003eCrossover: two electro-acoustic 3rd-order filters, 2.3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 80 Hz - 20 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 80 Hz - 15 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eBass extension: 55 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 91 dB\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 - 100 W mono; 15 - 50 W per channel stereo\u003c\/li\u003e\u003cli\u003eMaximum input: 70 W mono; 35 W per channel stereo\u003c\/li\u003e\u003cli\u003eImpedance: 4 ohm compatible in mono; 8 ohm per channel in stereo\u003c\/li\u003e\u003cli\u003eCabinet: PolyGlass, proof against weather, water and UV\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 27.3 × 19.4 × 18.7 cm\u003c\/li\u003e\u003cli\u003eWeight: 3.8 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Glossy black","offer_id":41671496007869,"sku":"12105703238","price":425.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671495975101,"sku":"12105703342","price":425.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Stylus-370-SM_su-videosell-01.jpg?v=1666705501"},{"product_id":"diffusori-da-esterno-paradigm-stylus470","title":"Paradigm Stylus470","description":"\u003cp\u003e\u003cstrong\u003eStylus470 is a two-way outdoor loudspeaker with a 190 mm mid\/bass unit and 93 dB sensitivity, sold as a pair: a closed, weatherproof PolyGlass box for bringing sound to large open spaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eStylus470: what is inside\u003c\/h2\u003e\n\u003cp\u003eWhat sets the Stylus470 apart is its 93 dB sensitivity: for the same power it plays louder than a less efficient speaker, and outdoors, where no walls support the sound, that is a real advantage. The impedance suits 8 ohm amplifiers; suggested power runs from 15 to 110 W, with a maximum input of 80 W.\u003c\/p\u003e\n\u003cp\u003eThere are two drive units: a mid\/bass unit with a 190 mm ICP cone on a die-cast basket and a PTD tweeter with a 25 mm dome, crossed over at 2.3 kHz by a third-order electro-acoustic filter. Quoted response falls within ±2 dB between 75 Hz and 20 kHz on axis and between 75 Hz and 18 kHz at 30° off axis. Bass extension goes down to 50 Hz (DIN).\u003c\/p\u003e\n\u003cp\u003eThe cabinet is PolyGlass, which Paradigm rates as resistant to bad weather, water and ultraviolet light, and it is an acoustic suspension design, hence fully closed. It measures 32.1 × 22.5 × 22.2 cm and weighs 4.8 kg: size and weight to bear in mind when choosing where to fix it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 2-way, 2 drivers, closed-box outdoor speaker\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eTweeter: PTD dome, 25 mm\u003c\/li\u003e\u003cli\u003eMid\/bass unit: ICP cone, 190 mm, die-cast basket\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic 3rd order, 2.3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 75 Hz - 20 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 75 Hz - 18 kHz (±2 dB)\u003c\/li\u003e\u003cli\u003eBass extension: 50 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 93 dB\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 - 110 W\u003c\/li\u003e\u003cli\u003eMaximum input: 80 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eCabinet: PolyGlass, proof against weather, water and UV\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 32.1 × 22.5 × 22.2 cm\u003c\/li\u003e\u003cli\u003eWeight: 4.8 kg each\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Glossy black","offer_id":41671496106173,"sku":"12105702238","price":1000.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496073405,"sku":"12105702342","price":1000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Stylus-470_su-videosell-02.jpg?v=1666710089"},{"product_id":"diffusori-paradigm-monitor-se-atom","title":"Paradigm Monitor SE Atom","description":"\u003cp\u003e\u003cstrong\u003eThe Monitor SE Atom is the standmount of the range, sold as a pair: a reflex-loaded two-way with a 25 mm aluminium dome tweeter and a 140 mm mid\/bass unit, for anyone after a compact speaker for a shelf or a stand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eMonitor SE Atom: how it is built\u003c\/h2\u003e\n\u003cp\u003eThe tweeter is the one fitted to the larger models in the range: a 25 mm X-PAL dome in pure aluminium, damped and cooled with ferrofluid. In front of it sits Paradigm's patented PPA lens, a perforated plate that does the job of a phase plug. It stops much of the out-of-phase energy, so treble output rises and evens out with no added colouration, and it also shields the dome from knocks.\u003c\/p\u003e\n\u003cp\u003eBelow the tweeter is a 140 mm mid\/bass unit whose cone is moulded in mineral-filled polypropylene, light yet stiff, with an inverted dust cap and a low-profile downroll surround. The two units hand over at 2.3 kHz through a second-order electro-acoustic filter. Measured on axis, response runs from 61 Hz to 21 kHz within ±3 dB, and bass extension reaches 45 Hz by the DIN method.\u003c\/p\u003e\n\u003cp\u003eIn-room sensitivity of 89 dB and an 8 ohm compatible load make the Atom a match for amplifiers rated between 15 and 100 W. The cabinet measures 32 × 18 × 27 cm and weighs 5.4 kg, so it sits happily on a shelf or on a stand, which is not included. Like its siblings, it draws on the research Paradigm carries out with Canada's National Research Council into sound reproduction and hearing. More than one finish is offered.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: two-way standmount with 2 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic, second order, 2.3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 61 Hz to 21 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 55 Hz to 17 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome behind a PPA lens, ferrofluid for damping and cooling\u003c\/li\u003e\u003cli\u003eMid\/bass unit: 140 mm cone of mineral-filled polypropylene with inverted dust cap\u003c\/li\u003e\u003cli\u003eSensitivity: 89 dB in room, 86 dB anechoic\u003c\/li\u003e\u003cli\u003eBass extension: 45 Hz (DIN)\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 100 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 50 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 32 × 18 × 27 cm\u003c\/li\u003e\u003cli\u003eWeight: 5.4 kg each\u003c\/li\u003e\u003cli\u003eStand: not supplied\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671496302781,"sku":"12105603514","price":297.5,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496368317,"sku":"12105603395","price":297.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Paradigm-Monitor-Atom-SE-su-Videosell-01.png?v=1782737510"},{"product_id":"diffusori-paradigm-monitor-se-3000f","title":"Paradigm Monitor SE 3000F","description":"\u003cp\u003e\u003cstrong\u003eThe Monitor SE 3000F is the entry floorstander of the range, sold as a pair: a three-way reflex design with four drive units, namely a 25 mm tweeter, a 140 mm midrange and two 140 mm woofers in a column one metre tall.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eMonitor SE 3000F: the design\u003c\/h2\u003e\n\u003cp\u003eUnlike the standmount, this model gives voices and bass their own drivers. A 140 mm midrange looks after the middle of the band, while two woofers of the same diameter handle low frequencies. All three use cones of mineral-filled polypropylene, a light and stiff material, with inverted dust caps and downroll surrounds. The second-order crossover hands over at 800 Hz and at 3 kHz.\u003c\/p\u003e\n\u003cp\u003eAt the top is the 25 mm X-PAL dome in pure aluminium, with ferrofluid to damp and cool it. The perforated PPA lens mounted ahead of the dome is a Paradigm patent: it behaves like a phase plug, holding back many out-of-phase frequencies so that output is both higher and more even, with no colouration added. It doubles as a guard for the dome.\u003c\/p\u003e\n\u003cp\u003eOn-axis response spans 55 Hz to 21 kHz within ±3 dB, with bass extension to 44 Hz (DIN). In-room sensitivity of 91 dB and an 8 ohm compatible load allow amplifiers from 15 to 130 W. Each column measures 100.4 × 23 × 28 cm and weighs 15.8 kg. Behind the design lies the acoustic research Paradigm conducts with Canada's National Research Council. More than one finish is offered.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: three-way floorstander with 4 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic, second order, 800 Hz and 3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 55 Hz to 21 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 42 Hz to 17 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome behind a PPA lens, ferrofluid for damping and cooling\u003c\/li\u003e\u003cli\u003eMidrange: 140 mm cone of mineral-filled polypropylene with inverted dust cap\u003c\/li\u003e\u003cli\u003eWoofers: a pair of 140 mm units, mineral-filled polypropylene cones on downroll surrounds\u003c\/li\u003e\u003cli\u003eSensitivity: 91 dB in room, 88 dB anechoic\u003c\/li\u003e\u003cli\u003eBass extension: 44 Hz (DIN)\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 130 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 100 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 100.4 × 23 × 28 cm\u003c\/li\u003e\u003cli\u003eWeight: 15.8 kg each\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671496499389,"sku":"12105604395","price":656.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496466621,"sku":"12105604514","price":656.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Monitor-SE-3000F_su-videosell-01.jpg?v=1666707852"},{"product_id":"diffusori-paradigm-monitor-se-6000f","title":"Paradigm Monitor SE 6000F","description":"\u003cp\u003e\u003cstrong\u003eThe Monitor SE 6000F is a three-way reflex floorstander, sold as a pair, with five drive units in a cabinet only 18 cm wide: a 25 mm tweeter, a 140 mm midrange and three 140 mm woofers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eMonitor SE 6000F: what is inside\u003c\/h2\u003e\n\u003cp\u003eWhat sets the 6000F apart is its shape: a narrow 18 cm baffle and a cabinet 36 cm deep, standing 105 cm high. Inside are three 140 mm woofers given over to low frequencies and one midrange of matching diameter for the middle of the band. The cones are mineral-filled polypropylene, fitted with inverted dust caps and downroll surrounds, a recipe that combines low mass with stiffness.\u003c\/p\u003e\n\u003cp\u003eHigh frequencies go to the 25 mm X-PAL dome in pure aluminium, ferrofluid damped and cooled. The patented, perforated PPA lens covering it serves as a phase plug: it holds back a broad band of out-of-phase frequencies, and the result is treble that is both stronger and smoother, free of colouration. The second-order network crosses at 3 kHz to the midrange and at 800 Hz to the woofers.\u003c\/p\u003e\n\u003cp\u003eThe three woofers lift in-room sensitivity to 93 dB, with on-axis response from 53 Hz to 21 kHz within ±3 dB and extension to 43 Hz (DIN). The load is 8 ohm compatible and suitable amplifiers range from 15 to 130 W. Each speaker weighs 19.9 kg. The design leans on the research Paradigm pursues with Canada's National Research Council. More than one finish is offered.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: three-way floorstander with 5 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic, second order, 800 Hz and 3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 53 Hz to 21 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 40 Hz to 17 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome behind a PPA lens, ferrofluid for damping and cooling\u003c\/li\u003e\u003cli\u003eMidrange: 140 mm cone of mineral-filled polypropylene with inverted dust cap\u003c\/li\u003e\u003cli\u003eWoofers: trio of 140 mm units, mineral-filled polypropylene cones on downroll surrounds\u003c\/li\u003e\u003cli\u003eSensitivity: 93 dB in room, 90 dB anechoic\u003c\/li\u003e\u003cli\u003eBass extension: 43 Hz (DIN)\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 130 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 100 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 105 × 18 × 36 cm\u003c\/li\u003e\u003cli\u003eWeight: 19.9 kg each\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671496564925,"sku":"12105605395","price":848.3,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496532157,"sku":"12105605514","price":848.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Monitor-SE-3000F_su-videosell-01_9414d62f-1838-4d22-b38e-1df08e509c51.jpg?v=1666708011"},{"product_id":"diffusori-paradigm-monitor-se-8000f","title":"Paradigm Monitor SE 8000F","description":"\u003cp\u003e\u003cstrong\u003eThe Monitor SE 8000F is the largest floorstander of the range, sold as a pair: a three-way reflex design with five drive units, among them a 165 mm midrange and three 203 mm woofers, for big rooms and listeners who want deep bass.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eMonitor SE 8000F: drivers and cabinet\u003c\/h2\u003e\n\u003cp\u003eAt the head of the range everything grows. The midrange goes up to 165 mm and the three woofers to 203 mm, still using cones of mineral-filled polypropylene, with dust caps inverted and downroll surrounds: light, stiff diaphragms, here with far more surface area than the other floorstanders can muster. Bass extension therefore reaches 35 Hz (DIN), and on-axis response covers 45 Hz to 21 kHz within ±3 dB.\u003c\/p\u003e\n\u003cp\u003eThe tweeter remains the 25 mm X-PAL dome in pure aluminium, with ferrofluid for damping and cooling. The PPA lens, a patented perforated plate set ahead of the dome, works as a phase plug: it removes most out-of-phase frequencies, raising and evening out the output with no colouration added, and protects the dome into the bargain. The second-order crossover operates at 800 Hz and at 3 kHz.\u003c\/p\u003e\n\u003cp\u003eAt 95 dB in room this is the most sensitive model in the range. The load is 8 ohm compatible, suitable amplifiers run from 15 to 150 W, and the maximum power input is 150 W. The cabinet measures 116.5 × 29.8 × 44.93 cm and weighs 32.2 kg. Like every Monitor SE, it stems from the acoustic research Paradigm undertakes with Canada's National Research Council. More than one finish is offered.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: three-way floorstander with 5 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic, second order, 800 Hz and 3 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 45 Hz to 21 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 45 Hz to 17 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome behind a PPA lens, ferrofluid for damping and cooling\u003c\/li\u003e\u003cli\u003eMidrange: 165 mm cone of mineral-filled polypropylene with inverted dust cap\u003c\/li\u003e\u003cli\u003eWoofers: trio of 203 mm units, mineral-filled polypropylene cones on downroll surrounds\u003c\/li\u003e\u003cli\u003eSensitivity: 95 dB in room, 92 dB anechoic\u003c\/li\u003e\u003cli\u003eBass extension: 35 Hz (DIN)\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 150 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 150 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 116.5 × 29.8 × 44.93 cm\u003c\/li\u003e\u003cli\u003eWeight: 32.2 kg each\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671496663229,"sku":"12105606395","price":1528.3,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496597693,"sku":"12105606514","price":1528.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Monitor-SE-8000F_su-videosell-01.jpg?v=1666708131"},{"product_id":"diffusore-centrale-paradigm-monitor-se-2000c","title":"Paradigm Monitor SE 2000C","description":"\u003cp\u003e\u003cstrong\u003eThe Monitor SE 2000C is the centre channel of the range: a reflex-loaded two-way with a 25 mm aluminium dome tweeter and two 140 mm mid\/bass units, intended for dialogue in a home cinema system built around other Monitor SE models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eMonitor SE 2000C: the centre of the range\u003c\/h2\u003e\n\u003cp\u003eA centre speaker has to share the tonal character of the front left and right, which is why the 2000C uses the drivers found elsewhere in the range. Its two 140 mm mid\/bass units have mineral-filled polypropylene cones, light and stiff, with inverted dust caps and downroll surrounds. They work together up to 2 kHz, where a second-order electro-acoustic filter passes the signal to the tweeter.\u003c\/p\u003e\n\u003cp\u003eThat tweeter is the 25 mm X-PAL dome in pure aluminium, cooled and damped with ferrofluid. Ahead of it is the PPA lens, perforated and covered by patent, which plays the part of a phase plug: it blocks many out-of-phase frequencies, so output increases and becomes more even with no colouring of the sound. The lens also keeps the dome safe from accidental knocks.\u003c\/p\u003e\n\u003cp\u003eSensitivity is 93 dB in room, with on-axis response from 65 Hz to 21 kHz within ±3 dB and bass extension to 53 Hz (DIN). The load is 8 ohm compatible and recommended amplification runs from 15 to 100 W. The cabinet, laid out horizontally, measures 18.3 × 50 × 28 cm and weighs 8.6 kg. This model too comes out of Paradigm's research with Canada's National Research Council. More than one finish is offered.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: two-way centre speaker with 3 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eCrossover: electro-acoustic, second order, 2 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 65 Hz to 21 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 64 Hz to 17 kHz within ±3 dB\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome behind a PPA lens, ferrofluid for damping and cooling\u003c\/li\u003e\u003cli\u003eMid\/bass units: two of 140 mm, cones of mineral-filled polypropylene, dust caps inverted\u003c\/li\u003e\u003cli\u003eSensitivity: 93 dB in room, 90 dB anechoic\u003c\/li\u003e\u003cli\u003eBass extension: 53 Hz (DIN)\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 100 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 50 W\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 18.3 × 50 × 28 cm\u003c\/li\u003e\u003cli\u003eWeight: 8.6 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, white\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671496728765,"sku":"12105607514","price":211.65,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496695997,"sku":"12105607395","price":211.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Monitor-SE-2000C_frontale-nero-senza-teletta-su-videosell.jpg?v=1651478577"},{"product_id":"diffusori-paradigm-premier-100b","title":"Paradigm Premier 100B","description":"\u003cp\u003e\u003cstrong\u003eThe Paradigm Premier 100B is a compact two-way reflex standmount, sold as a pair, with a 25 mm X-PAL dome tweeter and a 140 mm mid\/bass unit, intended for amplifiers of 15 to 130 W.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePremier 100B: the design\u003c\/h2\u003e\n\u003cp\u003eThe Premier 100B covers the whole range with two drive units. At the top sits a tweeter with a 25 mm X-PAL dome, damped and cooled by ferrofluid; below it, a 140 mm mid\/bass unit with a carbon-filled polypropylene cone on an ART surround. Each one works behind a perforated PPA lens, the part Paradigm uses to bring the output of the diaphragm back into phase.\u003c\/p\u003e\n\u003cp\u003eThe handover between the two happens at 2.0 kHz through a second-order electro-acoustic filter. Quoted on-axis response runs from 68 Hz to 25 kHz within ±3 dB; at 30° off axis the lower limit is unchanged and the upper one drops to 20 kHz, so a listener away from the centre seat gives up only the very top. With reflex loading, bass extension to the DIN standard reaches 50 Hz.\u003c\/p\u003e\n\u003cp\u003eSensitivity is 90 dB in room and 87 dB anechoic, and the impedance suits 8 ohm amplifier outputs. Paradigm recommends amplifiers of 15 to 130 W and gives 70 W as the maximum input power. Each cabinet measures 28.2 × 16.9 × 23.9 cm and weighs 5.85 kg; no stand is supplied. The model comes in more than one finish.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: standmount, two-way with 2 drive units, reflex loaded\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome, ferrofluid, PPA lens\u003c\/li\u003e\u003cli\u003eMid\/bass unit: 140 mm, carbon-filled polypropylene cone, ART surround, PPA lens\u003c\/li\u003e\u003cli\u003eCrossover: 2.0 kHz, second-order electro-acoustic\u003c\/li\u003e\u003cli\u003eOn-axis response: 68 Hz to 25 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 68 Hz to 20 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eBass extension (DIN): 50 Hz\u003c\/li\u003e\u003cli\u003eSensitivity: 90 dB in room, 87 dB anechoic\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 130 W\u003c\/li\u003e\u003cli\u003eMaximum input: 70 W\u003c\/li\u003e\u003cli\u003eImpedance: suits 8 ohm amplifiers\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 28.2 × 16.9 × 23.9 cm\u003c\/li\u003e\u003cli\u003eWeight: 5.85 kg each\u003c\/li\u003e\u003cli\u003eStand: not supplied\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white, espresso\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671496794301,"sku":"12105608233","price":640.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496761533,"sku":"12105608395","price":640.0,"currency_code":"EUR","in_stock":true},{"title":"Dark wood","offer_id":41671496827069,"sku":"12105608515","price":640.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Premier-100B_su-videosell-01.jpg?v=1666708957"},{"product_id":"diffusori-paradigm-premier-200b","title":"Paradigm Premier 200B","description":"\u003cp\u003e\u003cstrong\u003eThe Paradigm Premier 200B is a two-way reflex standmount loudspeaker, sold as a pair: a 165 mm mid\/bass unit, a 25 mm X-PAL dome tweeter and an on-axis response that starts at 55 Hz.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePremier 200B: what is inside\u003c\/h2\u003e\n\u003cp\u003eThe heart of the Premier 200B is its 165 mm mid\/bass unit: a carbon-filled polypropylene cone, an ART surround and a perforated PPA lens fitted ahead of the diaphragm. It handles everything below 2.0 kHz, the frequency at which a second-order electro-acoustic filter hands the signal to the tweeter. That tweeter has a 25 mm X-PAL dome, relies on ferrofluid for damping and cooling, and carries a PPA lens of its own for phase alignment.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is reflex tuned, measures 33.5 × 19.8 × 32.1 cm and weighs 8.17 kg: plan for a stand, which is not part of the package. In return for that volume, quoted on-axis response spans 55 Hz to 25 kHz within ±3 dB, with a lower limit of 45 Hz to the DIN standard. At 30° off axis the stated band is 55 Hz - 20 kHz, again within ±3 dB.\u003c\/p\u003e\n\u003cp\u003eAs for amplification, the 200B is rated at 90 dB sensitivity in room (87 dB anechoic) with an impedance that suits 8 ohm outputs. The maker recommends amplifiers between 15 and 130 W and sets the maximum input power at 80 W. It is offered in more than one finish.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eConfiguration: two-way, 2 drive units, reflex, standmount\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome, ferrofluid, PPA lens\u003c\/li\u003e\u003cli\u003eMid\/bass unit: 165 mm, carbon-filled polypropylene cone, ART surround, PPA lens\u003c\/li\u003e\u003cli\u003eCrossover point: 2.0 kHz, second-order electro-acoustic filter\u003c\/li\u003e\u003cli\u003eOn-axis response: 55 Hz to 25 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 55 Hz to 20 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eBass extension (DIN): 45 Hz\u003c\/li\u003e\u003cli\u003eSensitivity: 90 dB in room, 87 dB anechoic\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 130 W\u003c\/li\u003e\u003cli\u003eMaximum input: 80 W\u003c\/li\u003e\u003cli\u003eImpedance: suits 8 ohm amplifiers\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 33.5 × 19.8 × 32.1 cm\u003c\/li\u003e\u003cli\u003eWeight: 8.17 kg each\u003c\/li\u003e\u003cli\u003eStand: not supplied\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white, espresso\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671496925373,"sku":"12105609233","price":784.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671496892605,"sku":"12105609395","price":784.0,"currency_code":"EUR","in_stock":true},{"title":"Dark wood","offer_id":41671496958141,"sku":"12105609515","price":784.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Premier-200B_su-videosell-01.jpg?v=1666709063"},{"product_id":"diffusori-paradigm-premier-700f","title":"Paradigm Premier 700F","description":"\u003cp\u003e\u003cstrong\u003eThe Paradigm Premier 700F is a three-way reflex floorstander with four drive units, sold as a pair: a 25 mm X-PAL tweeter, a 140 mm midrange and two 140 mm woofers in a cabinet just over a metre tall.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePremier 700F: drive units and crossover\u003c\/h2\u003e\n\u003cp\u003eIn the Premier 700F each band has a drive unit of its own. Treble goes to a tweeter with a 25 mm X-PAL dome, damped and cooled by ferrofluid; the midband to a 140 mm cone of carbon-filled polypropylene. Both work behind a perforated PPA lens, there to keep the phase aligned. Lower down are two 140 mm woofers, using the same cone material with an ART surround.\u003c\/p\u003e\n\u003cp\u003eThe crossover is second-order electro-acoustic, dividing at 800 Hz between woofers and midrange and at 2.5 kHz between midrange and tweeter. Relieving the midrange of bass duty is the point of a three-way: the cone that reproduces voices does not have to make the longest excursions as well. Quoted response is 45 Hz - 25 kHz within ±3 dB on axis and 45 Hz - 20 kHz at 30° off axis, while bass extension to the DIN standard reaches 33 Hz.\u003c\/p\u003e\n\u003cp\u003eWith 91 dB sensitivity in room (88 dB anechoic) and an impedance that suits 8 ohm outputs, the 700F partners amplifiers of 15 to 180 W; maximum input power is 130 W. The cabinet measures 101.2 × 21.2 × 32.1 cm and weighs 21.88 kg: a slim column that takes up little floor. There is a choice of finishes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: floorstander, three-way with 4 drive units, reflex loaded\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome, ferrofluid, PPA lens\u003c\/li\u003e\u003cli\u003eMidrange: 140 mm, carbon-filled polypropylene cone, PPA lens\u003c\/li\u003e\u003cli\u003eWoofers: 2 × 140 mm, carbon-filled polypropylene cones, ART surround\u003c\/li\u003e\u003cli\u003eCrossover: 800 Hz and 2.5 kHz, second-order electro-acoustic\u003c\/li\u003e\u003cli\u003eOn-axis response: 45 Hz to 25 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 45 Hz to 20 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eBass extension (DIN): 33 Hz\u003c\/li\u003e\u003cli\u003eSensitivity: 91 dB in room, 88 dB anechoic\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 180 W\u003c\/li\u003e\u003cli\u003eMaximum input: 130 W\u003c\/li\u003e\u003cli\u003eImpedance: suits 8 ohm amplifiers\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 101.2 × 21.2 × 32.1 cm\u003c\/li\u003e\u003cli\u003eWeight: 21.88 kg each\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white, espresso\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671497056445,"sku":"12105610233","price":1528.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671497023677,"sku":"12105610395","price":1528.0,"currency_code":"EUR","in_stock":true},{"title":"Dark wood","offer_id":41671497089213,"sku":"12105610515","price":1528.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Premier-700F_su-videosell-01.jpg?v=1666708274"},{"product_id":"diffusori-paradigm-premier-800f","title":"Paradigm Premier 800F","description":"\u003cp\u003e\u003cstrong\u003eThe Paradigm Premier 800F is a three-way reflex floorstanding loudspeaker, sold as a pair, with a 25 mm X-PAL tweeter, a 165 mm midrange and two 165 mm woofers: it reaches 27 Hz (DIN) and takes amplifiers of up to 250 W.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePremier 800F: how it is built\u003c\/h2\u003e\n\u003cp\u003eThe Premier 800F puts four drive units to work across three ways. Its two 165 mm woofers have carbon-filled polypropylene cones on ART surrounds and operate up to 700 Hz. Above that the midrange takes over, also 165 mm and with the same kind of cone, before giving way at 2.5 kHz to the 25 mm X-PAL dome tweeter with ferrofluid. Midrange and tweeter each carry a perforated PPA lens to align their phase; the filters are second-order electro-acoustic.\u003c\/p\u003e\n\u003cp\u003eThe reflex cabinet stands 105.3 cm high, 23 cm wide and 35 cm deep, and weighs 24.2 kg. That volume and the doubled woofer area show in the figures: on-axis response of 43 Hz to 25 kHz within ±3 dB and bass extension of 27 Hz to the DIN standard. Move 30° off axis and the stated band is still 43 Hz - 20 kHz, so good sound is not confined to one seat on the sofa.\u003c\/p\u003e\n\u003cp\u003eSensitivity is 92 dB in room and 89 dB anechoic, figures that allow healthy levels even from modest power. The recommended amplifier range is 15 to 250 W, maximum input power is 180 W and the impedance suits 8 ohm outputs. The speaker is available in more than one finish.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eConfiguration: three-way, 4 drive units, reflex, floorstanding\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome, ferrofluid, PPA lens\u003c\/li\u003e\u003cli\u003eMidrange: 165 mm, carbon-filled polypropylene cone, PPA lens\u003c\/li\u003e\u003cli\u003eWoofers: 2 × 165 mm, carbon-filled polypropylene cones, ART surround\u003c\/li\u003e\u003cli\u003eCrossover points: 700 Hz and 2.5 kHz, second-order electro-acoustic filters\u003c\/li\u003e\u003cli\u003eOn-axis response: 43 Hz to 25 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 43 Hz to 20 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eBass extension (DIN): 27 Hz\u003c\/li\u003e\u003cli\u003eSensitivity: 92 dB in room, 89 dB anechoic\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 250 W\u003c\/li\u003e\u003cli\u003eMaximum input: 180 W\u003c\/li\u003e\u003cli\u003eImpedance: suits 8 ohm amplifiers\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 105.3 × 23 × 35 cm\u003c\/li\u003e\u003cli\u003eWeight: 24.2 kg each\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black, white, espresso\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671497154749,"sku":"12105611233","price":2208.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671497121981,"sku":"12105611395","price":2208.0,"currency_code":"EUR","in_stock":true},{"title":"Dark wood","offer_id":41671497187517,"sku":"12105611515","price":2208.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Premier-800F_su-videosell-01.jpg?v=1666708387"},{"product_id":"diffusore-centrale-paradigm-premier-500c","title":"Paradigm Premier 500C","description":"\u003cp\u003e\u003cstrong\u003eThe Paradigm Premier 500C is a sealed three-way centre speaker with four drive units: a 25 mm X-PAL tweeter, a 102 mm X-PAL midrange and two 140 mm woofers, there to carry the dialogue in a home cinema system.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePremier 500C: layout and drive units\u003c\/h2\u003e\n\u003cp\u003eThe Premier 500C is a true three-way centre: alongside its two 140 mm woofers, with carbon-filled polypropylene cones and ART surrounds, it has a dedicated 102 mm midrange with an anodised aluminium X-PAL cone and a 25 mm X-PAL dome tweeter, damped and cooled by ferrofluid. Midrange and tweeter are fitted with the perforated PPA lens. Voices therefore pass through a drive unit that is not asked to reproduce bass too.\u003c\/p\u003e\n\u003cp\u003eThe filters, second-order electro-acoustic, divide at 600 Hz between woofers and midrange and at 2.5 kHz between midrange and tweeter. The cabinet works as an acoustic suspension design, meaning it is sealed and has no reflex ports. Quoted on-axis response runs from 73 Hz to 25 kHz within ±3 dB and bass extension to the DIN standard is 47 Hz. At 30° off axis the band is 73 Hz - 20 kHz: a figure that matters in a centre speaker, since not every viewer sits in front of the screen.\u003c\/p\u003e\n\u003cp\u003eSensitivity is 92 dB in room and 89 dB anechoic, with an impedance that suits 8 ohm outputs. Recommended amplifiers range from 15 to 120 W and maximum input power is 80 W. The cabinet is 18 cm high, 51.5 cm wide and 32 cm deep, and weighs 11.8 kg. It is offered in more than one finish.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: centre speaker, three-way with 4 drive units, sealed cabinet\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome, ferrofluid, PPA lens\u003c\/li\u003e\u003cli\u003eMidrange: 102 mm, anodised aluminium X-PAL cone, PPA lens\u003c\/li\u003e\u003cli\u003eWoofers: 2 × 140 mm, carbon-filled polypropylene cones, ART surround\u003c\/li\u003e\u003cli\u003eCrossover: 600 Hz and 2.5 kHz, second-order electro-acoustic\u003c\/li\u003e\u003cli\u003eOn-axis response: 73 Hz to 25 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 73 Hz to 20 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eBass extension (DIN): 47 Hz\u003c\/li\u003e\u003cli\u003eSensitivity: 92 dB in room, 89 dB anechoic\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 120 W\u003c\/li\u003e\u003cli\u003eMaximum input: 80 W\u003c\/li\u003e\u003cli\u003eImpedance: suits 8 ohm amplifiers\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 18 × 51.5 × 32 cm\u003c\/li\u003e\u003cli\u003eWeight: 11.8 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, white, espresso\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671497253053,"sku":"12105612233","price":706.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671497285821,"sku":"12105612395","price":706.0,"currency_code":"EUR","in_stock":true},{"title":"Dark wood","offer_id":41671497351357,"sku":"12105612515","price":706.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Premier-500C_su-videosell-01.jpg?v=1666705292"},{"product_id":"diffusore-centrale-paradigm-premier-600c","title":"Paradigm Premier 600C","description":"\u003cp\u003e\u003cstrong\u003eThe Paradigm Premier 600C is a large-format three-way centre speaker: six drive units, including two 165 mm woofers and two passive radiators of the same diameter, in a cabinet 90.8 cm wide for home cinema systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePremier 600C: six drive units, three ways\u003c\/h2\u003e\n\u003cp\u003eThe Premier 600C has six drive units. Four of them are active: a 25 mm X-PAL dome tweeter with ferrofluid, a 102 mm midrange with an anodised aluminium X-PAL cone and two 165 mm woofers in carbon-filled polypropylene, on ART surrounds. The remaining two are 165 mm passive radiators, built like the woofers: they receive no signal and do the job that falls to the port in a conventional reflex design.\u003c\/p\u003e\n\u003cp\u003eTweeter and midrange have the perforated PPA lens, and the second-order electro-acoustic filters divide at 700 Hz and 2.5 kHz. On axis the quoted response is 60 Hz - 25 kHz within ±3 dB, at 30° off axis 60 Hz - 20 kHz; bass extension to the DIN standard is 40 Hz. Sensitivity, at 94 dB in room and 91 dB anechoic, is high: a few watts are enough for substantial listening levels.\u003c\/p\u003e\n\u003cp\u003eThe impedance suits 8 ohm outputs, recommended amplifiers range from 15 to 180 W and maximum input power is 120 W. The size needs considering before choosing the TV furniture: 19.7 cm high, 90.8 cm wide and 34.2 cm deep, at 19.5 kg. No stand is supplied. More than one finish is offered.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eConfiguration: centre speaker, three-way, 6 drive units, reflex via passive radiators\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm X-PAL dome, ferrofluid, PPA lens\u003c\/li\u003e\u003cli\u003eMidrange: 102 mm, anodised aluminium X-PAL cone, PPA lens\u003c\/li\u003e\u003cli\u003eWoofers: 2 × 165 mm, carbon-filled polypropylene cones, ART surround\u003c\/li\u003e\u003cli\u003ePassive radiators: 2 × 165 mm, carbon-filled polypropylene cones, ART surround\u003c\/li\u003e\u003cli\u003eCrossover points: 700 Hz and 2.5 kHz, second-order electro-acoustic filters\u003c\/li\u003e\u003cli\u003eOn-axis response: 60 Hz to 25 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 60 Hz to 20 kHz (±3 dB)\u003c\/li\u003e\u003cli\u003eBass extension (DIN): 40 Hz\u003c\/li\u003e\u003cli\u003eSensitivity: 94 dB in room, 91 dB anechoic\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 180 W\u003c\/li\u003e\u003cli\u003eMaximum input: 120 W\u003c\/li\u003e\u003cli\u003eImpedance: suits 8 ohm amplifiers\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D): 19.7 × 90.8 × 34.2 cm\u003c\/li\u003e\u003cli\u003eWeight: 19.5 kg\u003c\/li\u003e\u003cli\u003eStand: not supplied\u003c\/li\u003e\u003cli\u003eFinishes: black, white, espresso\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Black","offer_id":41671497613501,"sku":"12105613233","price":1061.65,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41671497580733,"sku":"12105613395","price":1061.65,"currency_code":"EUR","in_stock":true},{"title":"Dark wood","offer_id":41671497547965,"sku":"12105613515","price":1061.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/premier-600c.-nero-su-videosell-04.png?v=1658917699"},{"product_id":"diffusori-paradigm-founder-40b","title":"Paradigm Founder 40B","description":"\u003cp\u003e\u003cstrong\u003eThe Founder 40B is a two-way, reflex-loaded standmount speaker sold as a pair: a 25 mm AL-MAC dome tweeter and a 152 mm AL-MAG mid\/bass unit in a faceted cabinet, for anyone who wants Founder technology in the most compact format.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFounder 40B: how it is built\u003c\/h2\u003e\n\u003cp\u003eThe tweeter uses a 25 mm dome made of AL-MAC, the blend of aluminium, magnesium and ceramic that Paradigm developed to obtain a diaphragm that is stiff, light and reluctant to ring; it is damped and cooled with ferrofluid. It sits in the OSW waveguide, whose profile concentrates output on the listening area and lets it fall away gradually to the sides, cutting down reflections from the walls, glass and hard floors of present-day rooms. In front of the dome is the perforated PPA lens, which brings the frequencies into phase and doubles as protection.\u003c\/p\u003e\n\u003cp\u003eThe 152 mm mid\/bass unit is the only cone in the speaker and handles everything below 1.6 kHz, where a second-order electro-acoustic filter hands over to the tweeter. Its diaphragm is AL-MAG, an aluminium and magnesium alloy, fitted with a PPA lens of its own and a third-generation ART surround designed for long excursions. The Vertical Mounting System increases the working cone area without increasing the footprint, while Shock-Mount fixing decouples the unit from the front panel through an elastomer support, so that vibration cannot travel from chassis to cabinet or back.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is not the usual rectangular box: its angled faces and internal Cascade-Fusion braces stiffen it and break up standing waves. Quoted response runs from 69 Hz to 23 kHz within ±2 dB on axis, with bass reaching down to 41 Hz (DIN). Sensitivity is 92 dB in room and 89 dB anechoic, the load suits 8 ohm amplifiers and recommended power is 15 to 150 W. The terminals allow bi-wiring and bi-amping. Design and manufacture take place at Paradigm's own factory near Toronto, Canada. No stand is supplied.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 2-way standmount with 2 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm AL-MAC dome, OSW waveguide, PPA lens, ferrofluid\u003c\/li\u003e\u003cli\u003eMid\/bass unit: 152 mm AL-MAG cone, PPA lens, Gen3 ART surround, Shock-Mount\u003c\/li\u003e\u003cli\u003eCrossover: second-order electro-acoustic, 1.6 kHz\u003c\/li\u003e\u003cli\u003eOn-axis response: 69 Hz - 23 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 69 Hz - 20 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eBass extension: 41 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 92 dB in room, 89 dB anechoic\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 150 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 120 W\u003c\/li\u003e\u003cli\u003eConnection: bi-wire and bi-amp ready\u003c\/li\u003e\u003cli\u003eDimensions (H x W x D): 36.8 x 19.7 x 32 cm\u003c\/li\u003e\u003cli\u003eWeight: 11.3 kg per speaker\u003c\/li\u003e\u003cli\u003eStand: not supplied\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, black walnut, cherry, walnut\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Lacquered black","offer_id":41671497679037,"sku":"12105614059","price":2449.0,"currency_code":"EUR","in_stock":true},{"title":"Dark Walnut","offer_id":41671497711805,"sku":"12105614516","price":2449.0,"currency_code":"EUR","in_stock":true},{"title":"Red cherry","offer_id":41671497777341,"sku":"12105614517","price":2449.0,"currency_code":"EUR","in_stock":true},{"title":"Light walnut","offer_id":41671497744573,"sku":"12105614319","price":2449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Founder-40B_su-videosell-01.jpg?v=1666708709"},{"product_id":"diffusori-paradigm-founder-80f","title":"Paradigm Founder 80F","description":"\u003cp\u003e\u003cstrong\u003eThe Founder 80F is the slimmest floorstander in the range and is sold as a pair: a reflex-loaded two-and-a-half-way design with four drive units, namely an AL-MAC tweeter, an AL-MAG mid\/bass unit and two 152 mm Carbon-X woofers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFounder 80F: the design\u003c\/h2\u003e\n\u003cp\u003eThe two-and-a-half-way layout shares the work like this: the 152 mm AL-MAG mid\/bass unit covers bass and midrange up to 1.8 kHz, where the tweeter takes over, while the two woofers of the same diameter join in only below 500 Hz to add weight to the low end. The woofers use a one-piece Carbon-X cone, strong at high levels and low in mass, with a third-generation ART surround; the mid\/bass unit carries the perforated PPA lens ahead of its diaphragm, which aligns output in phase and makes it more predictable at a distance. All three cones are fixed to the baffle by the Shock-Mount system, which isolates them from the cabinet.\u003c\/p\u003e\n\u003cp\u003eTreble comes from a tweeter with a 25 mm AL-MAC dome (aluminium, magnesium and ceramic), ferrofluid damped and set in the OSW waveguide. The waveguide steers high frequencies towards the listener and progressively lowers their level to the sides, which helps in large, open rooms with plenty of reflective surfaces. The faceted cabinet with Cascade-Fusion braces stands on Shock-Mount feet that decouple it from the floor twice over: they are adjusted from the top, without tilting the speaker, and come with fittings for both carpet and hard floors.\u003c\/p\u003e\n\u003cp\u003eThe quoted figures: on-axis response from 50 Hz to 23 kHz within ±2 dB, bass reaching down to 28 Hz (DIN), sensitivity of 93 dB in room and 90 dB anechoic. Impedance is 8 ohm compatible and the recommended amplifier is 15 to 220 W, with 180 W as the maximum power input. Like the other Founder models it accepts bi-wiring and bi-amping, and it is designed and built in Canada, just outside Toronto. It stands 97.1 cm tall and weighs 23.6 kg.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 2.5-way floorstander with 4 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm AL-MAC dome, OSW waveguide, PPA lens, ferrofluid\u003c\/li\u003e\u003cli\u003eMid\/bass unit: 152 mm AL-MAG cone, PPA lens, Gen3 ART surround, Shock-Mount\u003c\/li\u003e\u003cli\u003eWoofers: 2 x 152 mm one-piece Carbon-X cones, Gen3 ART surround, Shock-Mount\u003c\/li\u003e\u003cli\u003eCrossover: second order at 1.8 kHz (tweeter) and 500 Hz (woofers)\u003c\/li\u003e\u003cli\u003eOn-axis response: 50 Hz - 23 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 50 Hz - 20 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eBass extension: 28 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 93 dB in room, 90 dB anechoic\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 220 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 180 W\u003c\/li\u003e\u003cli\u003eConnection: bi-wire and bi-amp ready\u003c\/li\u003e\u003cli\u003eFeet: Shock-Mount, top-adjustable, fittings for carpet and hard floors\u003c\/li\u003e\u003cli\u003eDimensions (H x W x D): 97.1 x 29.8 x 35.6 cm\u003c\/li\u003e\u003cli\u003eWeight: 23.6 kg per speaker\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, black walnut, cherry, walnut\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Lacquered black","offer_id":41671497810109,"sku":"12105616059","price":3999.0,"currency_code":"EUR","in_stock":true},{"title":"Dark Walnut","offer_id":41671497842877,"sku":"12105616516","price":3999.0,"currency_code":"EUR","in_stock":true},{"title":"Red cherry","offer_id":41671497908413,"sku":"12105616517","price":3999.0,"currency_code":"EUR","in_stock":true},{"title":"Light walnut","offer_id":41671497875645,"sku":"12105616319","price":3999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Founder-80F_su-videosell-01.jpg?v=1666707701"},{"product_id":"diffusori-paradigm-founder-100f","title":"Paradigm Founder 100F","description":"\u003cp\u003e\u003cstrong\u003eThe Founder 100F is a three-way, reflex-loaded floorstander with five drive units, sold as a pair: three 177 mm Carbon-X woofers, a dedicated AL-MAG midrange and the AL-MAC tweeter, for larger rooms and amplifiers of up to 350 W.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFounder 100F: what is inside\u003c\/h2\u003e\n\u003cp\u003eUnlike the smaller models, here the midrange does nothing but midrange. It is a 152 mm cone in AL-MAG, the aluminium and magnesium alloy chosen for the band where the ear is most sensitive, that of voices; it works between 500 Hz and 2.1 kHz, has a multi-layer high-temperature voice coil and carries the perforated PPA lens, which makes the frequencies reach the listener at the same instant. Above it, the 25 mm tweeter has an AL-MAC dome, is ferrofluid cooled and sits in the OSW waveguide, which concentrates output on the listening area and reduces it towards the sides of the room.\u003c\/p\u003e\n\u003cp\u003eBelow 500 Hz three 177 mm woofers come into play. The Carbon-X cone is made in a single piece so that it stays rigid at high levels without gaining weight, the third-generation ART surround permits very long excursions and the Vertical Mounting System obtains more radiating area from the same footprint. Midrange and woofers are fixed with the Shock-Mount system: an elastomer support stops vibration passing from the chassis to the cabinet and back. Paradigm's stated aim is to lower distortion, since that, rather than level as such, is what makes loud listening tiring.\u003c\/p\u003e\n\u003cp\u003eThe faceted cabinet, stiffened by Cascade-Fusion braces, rests on double-decoupled Shock-Mount feet that are adjusted from the top and supplied with fittings for carpet and hard floors. Quoted response is 42 Hz - 23 kHz within ±2 dB on axis, extending to 26 Hz (DIN); sensitivity is 93 dB in room (90 dB anechoic) and impedance is 8 ohm compatible. Bi-wiring and bi-amping are provided for. Each speaker stands 106.5 cm tall, weighs 32.7 kg and is built in Canada.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 3-way floorstander with 5 drive units, reflex-loaded\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm AL-MAC dome, OSW waveguide, PPA lens, ferrofluid\u003c\/li\u003e\u003cli\u003eMidrange: 152 mm AL-MAG cone with PPA lens and Shock-Mount fixing\u003c\/li\u003e\u003cli\u003eWoofers: 3 x 177 mm one-piece Carbon-X cones, Gen3 ART surround, Shock-Mount\u003c\/li\u003e\u003cli\u003eCrossover: second order at 2.1 kHz (tweeter) and 500 Hz (woofers)\u003c\/li\u003e\u003cli\u003eOn-axis response: 42 Hz - 23 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 42 Hz - 20 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eBass extension: 26 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 93 dB in room, 90 dB anechoic\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 350 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 250 W\u003c\/li\u003e\u003cli\u003eConnection: bi-wire and bi-amp ready\u003c\/li\u003e\u003cli\u003eFeet: Shock-Mount, top-adjustable, fittings for carpet and hard floors\u003c\/li\u003e\u003cli\u003eDimensions (H x W x D): 106.5 x 32.8 x 40.9 cm\u003c\/li\u003e\u003cli\u003eWeight: 32.7 kg per speaker\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, black walnut, cherry, walnut\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Lacquered black","offer_id":41671498236093,"sku":"12105617059","price":5999.0,"currency_code":"EUR","in_stock":true},{"title":"Dark Walnut","offer_id":41671498268861,"sku":"12105617516","price":5999.0,"currency_code":"EUR","in_stock":true},{"title":"Red cherry","offer_id":41671498203325,"sku":"12105617517","price":5999.0,"currency_code":"EUR","in_stock":true},{"title":"Light walnut","offer_id":41671498301629,"sku":"12105617319","price":5999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/founder-100f.jpg?v=1649061467"},{"product_id":"diffusori-paradigm-founder-120h","title":"Paradigm Founder 120H","description":"\u003cp\u003e\u003cstrong\u003eThe Founder 120H is the hybrid floorstander at the top of the range, sold as a pair: a reflex-loaded three-way whose three 215 mm Carbon-X woofers are driven by a built-in amplifier, while midrange and treble are left to the system's own amplifier.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFounder 120H: active bass and room correction\u003c\/h2\u003e\n\u003cp\u003eThe point of the hybrid design is to relieve the external amplifier of the hardest part of the job. The three 215 mm woofers, with a one-piece Carbon-X cone and a third-generation ART surround, are powered by the internal electronics and filtered at 300 Hz by a digital and analogue crossover; the amplifier in the system looks after midrange and tweeter only, with far less strain. Speaker and bass amplification are conceived as a single system, which is what allows quoted extension down to 18 Hz (DIN) and an on-axis response of 22 Hz - 23 kHz within ±2 dB from a cabinet 115.3 cm tall.\u003c\/p\u003e\n\u003cp\u003eThe active section incorporates ARC Genesis, the Anthem Room Correction system: it measures how the speaker behaves in the room and acts on the harmful effects of the acoustics while leaving alone whatever works. Because it belongs to the control stage of the internal amplifier, it can be used with electronics of any make. It is a practical help precisely in the bass, where the room matters most.\u003c\/p\u003e\n\u003cp\u003eEverything else is shared with the larger models in the range. The 152 mm AL-MAG midrange, with perforated PPA lens and Shock-Mount fixing, works up to 2.4 kHz; the 25 mm tweeter with AL-MAC dome, ferrofluid cooled, sits in the OSW waveguide, which directs high frequencies at the listening area and limits side reflections. The faceted cabinet with Cascade-Fusion braces stands on Shock-Mount feet adjusted from the top. Sensitivity is 95 dB in room (92 dB anechoic), impedance is 8 ohm compatible and the recommended external amplifier is 15 to 400 W. Each speaker weighs 41.7 kg and is built in Canada.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 3-way hybrid floorstander, 5 drive units, active bass, reflex-loaded\u003c\/li\u003e\u003cli\u003eTweeter: 25 mm AL-MAC dome, OSW waveguide, PPA lens, ferrofluid\u003c\/li\u003e\u003cli\u003eMidrange: 152 mm AL-MAG cone with PPA lens and Shock-Mount fixing\u003c\/li\u003e\u003cli\u003eWoofers: 3 x 215 mm one-piece Carbon-X cones, Gen3 ART surround, Shock-Mount\u003c\/li\u003e\u003cli\u003eBass section: built-in amplifier with ARC Genesis room correction\u003c\/li\u003e\u003cli\u003eCrossover: 2.4 kHz second order (tweeter); digital and analogue at 300 Hz (woofers)\u003c\/li\u003e\u003cli\u003eOn-axis response: 22 Hz - 23 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 22 Hz - 20 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eBass extension: 18 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 95 dB in room, 92 dB anechoic\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eRecommended external amplifier: 15 to 400 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 300 W\u003c\/li\u003e\u003cli\u003eFeet: Shock-Mount, top-adjustable, fittings for carpet and hard floors\u003c\/li\u003e\u003cli\u003eDimensions (H x W x D): 115.3 x 35.4 x 44.1 cm\u003c\/li\u003e\u003cli\u003eWeight: 41.7 kg per speaker\u003c\/li\u003e\u003cli\u003eSupplied: sold as a pair\u003c\/li\u003e\u003cli\u003eFinishes: black walnut, gloss black, walnut, cherry\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Dark Walnut","offer_id":41671498334397,"sku":"12105618516","price":8999.0,"currency_code":"EUR","in_stock":true},{"title":"Lacquered black","offer_id":41671498367165,"sku":"12105618059","price":8999.0,"currency_code":"EUR","in_stock":true},{"title":"Light walnut","offer_id":41671498432701,"sku":"12105618319","price":8999.0,"currency_code":"EUR","in_stock":true},{"title":"Red cherry","offer_id":41671498465469,"sku":"12105618517","price":8999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/founder-120H-nero-su-videosell-05.jpg?v=1658916383"},{"product_id":"diffusore-centrale-paradigm-founder-90c","title":"Paradigm Founder 90C","description":"\u003cp\u003e\u003cstrong\u003eThe Founder 90C is the large centre speaker in the range: a sealed three-way with a coaxial mid\/treble unit, two 177 mm Carbon-X woofers and two passive radiators, intended to give dialogue the same voicing as the Founder front speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFounder 90C: the coaxial unit and the passive radiators\u003c\/h2\u003e\n\u003cp\u003eAt the centre of the baffle is a coaxial drive unit: the tweeter with its 25 mm AL-MAC dome is placed on the same axis as the 152 mm AL-MAG midrange, so that mids and highs start from a single point. The tweeter keeps the OSW waveguide and perforated PPA lens of the floorstanding models, is ferrofluid cooled and uses a patent-pending dual-gap motor; the midrange has a patented continuous-flux Dual-Sync motor and is fixed with the Shock-Mount isolation system. The handover between the two takes place at 2.5 kHz.\u003c\/p\u003e\n\u003cp\u003eEither side of the coaxial unit are two 177 mm woofers with a one-piece Carbon-X cone and a third-generation ART surround, active below 500 Hz. They are joined by two passive radiators of the same diameter and with the same diaphragm: these have no motor and move in response to the pressure inside, extending the bass of a cabinet that remains sealed. Woofers and radiators are decoupled from the baffle by the Shock-Mount system, and Cascade-Fusion braces stiffen the faceted cabinet.\u003c\/p\u003e\n\u003cp\u003eQuoted on-axis response runs from 55 Hz to 23 kHz within ±2 dB, extending to 37 Hz (DIN); at 30° off axis the upper limit is 17 kHz. Sensitivity is 94 dB in room and 91 dB anechoic, impedance is 8 ohm compatible and recommended amplifier power is 15 to 260 W. It is ready for bi-wiring and bi-amping. At 90.8 cm wide and 22.6 cm high, it weighs 21.8 kg; any stand is not supplied. It is designed and built in Canada.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: 3-way centre speaker, 4 drive units and 2 passive radiators, sealed\u003c\/li\u003e\u003cli\u003eTweeter: coaxial, 25 mm AL-MAC dome, OSW waveguide, PPA lens, ferrofluid\u003c\/li\u003e\u003cli\u003eMidrange: coaxial, 152 mm AL-MAG cone, Dual-Sync motor, Shock-Mount\u003c\/li\u003e\u003cli\u003eWoofers: 2 x 177 mm one-piece Carbon-X cones, Gen3 ART surround, Shock-Mount\u003c\/li\u003e\u003cli\u003ePassive radiators: 2 x 177 mm Carbon-X cones with Gen3 ART surround\u003c\/li\u003e\u003cli\u003eCrossover: second order at 2.5 kHz (tweeter) and 500 Hz (woofers)\u003c\/li\u003e\u003cli\u003eOn-axis response: 55 Hz - 23 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eResponse 30° off axis: 55 Hz - 17 kHz within ±2 dB\u003c\/li\u003e\u003cli\u003eBass extension: 37 Hz (DIN)\u003c\/li\u003e\u003cli\u003eSensitivity: 94 dB in room, 91 dB anechoic\u003c\/li\u003e\u003cli\u003eImpedance: 8 ohm compatible\u003c\/li\u003e\u003cli\u003eRecommended amplifier: 15 to 260 W\u003c\/li\u003e\u003cli\u003eMaximum power input: 200 W\u003c\/li\u003e\u003cli\u003eConnection: bi-wire and bi-amp ready\u003c\/li\u003e\u003cli\u003eDimensions (H x W x D): 22.6 x 90.8 x 32.7 cm\u003c\/li\u003e\u003cli\u003eWeight: 21.8 kg\u003c\/li\u003e\u003cli\u003eStand: not supplied\u003c\/li\u003e\u003cli\u003eFinishes: gloss black, black walnut, cherry, walnut\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Lacquered black","offer_id":41671498498237,"sku":"12105619059","price":2847.0,"currency_code":"EUR","in_stock":true},{"title":"Dark Walnut","offer_id":41671498596541,"sku":"12105619516","price":2847.0,"currency_code":"EUR","in_stock":true},{"title":"Red cherry","offer_id":41671498531005,"sku":"12105619517","price":2847.0,"currency_code":"EUR","in_stock":true},{"title":"Light walnut","offer_id":41671498563773,"sku":"12105619319","price":2847.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-founder-90c-01.jpg?v=1662562189"},{"product_id":"subwoofer-paradigm-defiance-v12","title":"Paradigm Defiance V12","description":"\u003cp\u003e\u003cstrong\u003eThe Defiance V12 is a powered, ported subwoofer built around a 305 mm driver, intended for home cinema and stereo systems where deep bass is wanted and the adjustments are made from a smartphone app.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDefiance V12: the design\u003c\/h2\u003e\n\u003cp\u003eThe Defiance V12 uses a 305 mm driver whose diaphragm is polypropylene filled with carbon, a material picked for its mix of stiffness and low mass. The cabinet is reflex-tuned and the port is shaped so that air passes through quickly with little turbulence, which keeps chuffing noises down as the level rises. Quoted on-axis response runs from 23 to 200 Hz within ±3 dB, and low-frequency extension reaches 18 Hz measured to the DIN standard.\u003c\/p\u003e\n\u003cp\u003eThe built-in amplifier is a Class-D design that wakes and sleeps by itself when it senses a signal, and it carries a soft-clipping circuit that makes the onset of overload gentler. The manufacturer's data sheet does not yet state the wattage, as the measurements are being revised; the Italian distributor quotes 120 W continuous and 250 W peak.\u003c\/p\u003e\n\u003cp\u003eSet-up is handled from the phone: the low-pass filter can be moved between 35 and 120 Hz or bypassed altogether, and phase is continuously adjustable between 0° and 180°. The subwoofer is prepared for Anthem Room Correction, which tailors the response to the room. The rear panel offers two RCA inputs, two high-level inputs for connection to an amplifier's speaker terminals and a Micro USB socket used by ARC and for firmware updates; the Defiance WT wireless kit is a separate purchase.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: active subwoofer, reflex-loaded\u003c\/li\u003e\u003cli\u003eDriver: 305 mm, carbon-filled polypropylene diaphragm\u003c\/li\u003e\u003cli\u003eAmplifier: Class D, 120 W continuous and 250 W peak (distributor's figure)\u003c\/li\u003e\u003cli\u003eFunctions: automatic power on and standby, soft clipping\u003c\/li\u003e\u003cli\u003eOn-axis response: 23-200 Hz ±3 dB\u003c\/li\u003e\u003cli\u003eLow-end extension: 18 Hz (DIN)\u003c\/li\u003e\u003cli\u003eLow-pass filter: adjustable 35-120 Hz, can be bypassed\u003c\/li\u003e\u003cli\u003ePhase: continuous from 0° to 180°, set in the app\u003c\/li\u003e\u003cli\u003eRoom correction: prepared for Anthem Room Correction (ARC)\u003c\/li\u003e\u003cli\u003eInputs: 2 RCA (left and right\/LFE), 2 high-level, Micro USB service port\u003c\/li\u003e\u003cli\u003eInput impedance: 8.3 kΩ (RCA)\u003c\/li\u003e\u003cli\u003eCompatible accessory: Defiance WT wireless kit, not supplied\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D, grille on): 45.6 × 41.9 × 45.4 cm\u003c\/li\u003e\u003cli\u003eWeight: 19.1 kg\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Nero satinato","offer_id":53579526406488,"sku":"12105640318","price":845.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Paradigm-Defiance-V12_su-videosell-01.jpg?v=1666709259"},{"product_id":"subwoofer-paradigm-defiance-x10","title":"Paradigm Defiance X10","description":"\u003cp\u003e\u003cstrong\u003eThe Defiance X10 is an active reflex subwoofer with a 254 mm driver on an ART surround, app control and ARC room correction complete with microphone: a compact answer for home cinema and music listening.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDefiance X10: what is inside\u003c\/h2\u003e\n\u003cp\u003eAt the centre of the Defiance X10 sits a 254 mm driver with a carbon-filled polypropylene diaphragm and Paradigm's patented ART (Active Ridge Technology) surround. The edge is overmoulded with a row of ridges that give the diaphragm a longer stroke without buckling: the maker credits it with 3 dB of extra output and half the audible distortion of a conventional surround. The cabinet, made in Canada, is stiffened by internal braces and tuned through a low-turbulence reflex port.\u003c\/p\u003e\n\u003cp\u003eAmplification is Class D with automatic switch-on and soft clipping. Paradigm is revising its power measurements, so the official data sheet leaves them out; the Italian distributor quotes 300 W continuous and 600 W peak. On-axis response spans 29 to 240 Hz within ±3 dB and low-frequency extension reaches 24 Hz (DIN).\u003c\/p\u003e\n\u003cp\u003eParadigm's free Subwoofer Control app, for iOS and Android, lets you trim volume, low-pass filter, phase and deep-bass level from the listening seat, with three ready-made listening modes and a direct link to the ARC app. Anthem Room Correction measures the room using either the phone or the calibrated microphone in the box and evens out irregularities in the response. Inputs comprise three RCA sockets, two high-level connections and a Micro USB service port.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: active subwoofer, reflex-loaded\u003c\/li\u003e\u003cli\u003eDriver: 254 mm, carbon-filled polypropylene, ART surround\u003c\/li\u003e\u003cli\u003eAmplifier: Class D, 300 W continuous and 600 W peak (distributor's figure)\u003c\/li\u003e\u003cli\u003eFunctions: automatic power on and standby, soft clipping\u003c\/li\u003e\u003cli\u003eOn-axis response: 29-240 Hz ±3 dB\u003c\/li\u003e\u003cli\u003eLow-end extension: 24 Hz (DIN)\u003c\/li\u003e\u003cli\u003eLow-pass filter: adjustable 30-120 Hz\u003c\/li\u003e\u003cli\u003ePhase: 0° to 180°, from the app or the panel\u003c\/li\u003e\u003cli\u003eRoom correction: ARC (Anthem Room Correction), microphone supplied\u003c\/li\u003e\u003cli\u003eInputs: 3 RCA (left, right, LFE), 2 high-level, Micro USB service port\u003c\/li\u003e\u003cli\u003eInput impedance: 10 kΩ (RCA)\u003c\/li\u003e\u003cli\u003eCompatible accessory: Defiance WT wireless kit, not supplied\u003c\/li\u003e\u003cli\u003eDimensions (H × W × D, grille on): 41.7 × 38.1 × 41.7 cm\u003c\/li\u003e\u003cli\u003eWeight: 19.1 kg\u003c\/li\u003e\u003c\/ul\u003e","brand":"Paradigm","offers":[{"title":"Nero satinato","offer_id":53582194671960,"sku":"12105641318","price":1521.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/ParadigmDefianceX101.jpg?v=1731332999"},{"product_id":"diffusore-mk-sound-iw-150mkii","title":"MK Sound IW-150MKII","description":"\u003ch2\u003eMonitor performance integrated directly into the wall\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW150 is an architectural loudspeaker with twin 5.25-inch polypropylene woofers and three 1-inch soft fabric dome tweeters, 80 Hz-20 kHz response and 90 dB sensitivity. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003cp\u003eIt is designed for reference concealed LCR fronts and cinema systems. The architectural range uses driver and crossover technology from MK Sound monitors so visible and concealed speakers can be mixed without changing tonal character. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/li\u003e\n\u003cli\u003eMid\/bass section: twin 5.25-inch polypropylene woofers.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency section: three 1-inch soft fabric dome tweeters.\u003c\/li\u003e\n\u003cli\u003e80 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power 25-400 W.\u003c\/li\u003e\n\u003cli\u003e95 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eLow-profile paintable metal grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and response\u003c\/h3\u003e\n\u003cp\u003eThe system uses twin 5.25-inch polypropylene woofers with an array of three 1-inch soft fabric dome tweeters. Rated response is 80 Hz-20 kHz, with 90 dB sensitivity and recommended amplifier power of 25-400 W, matching the S150 family approach.\u003c\/p\u003e\n\u003ch3\u003eArchitectural integration\u003c\/h3\u003e\n\u003cp\u003eThe IW range uses steel baffles and low-profile metal grilles to reinforce the wall, reduce vibration and leave only the required surface visible. Grilles can be painted to match the room finish.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe baffle measures 354 x 311 mm, wall cut-out is 331 x 288 mm and required depth is 95 mm; weight is 8.5 kg. The IW mounting system is designed for stable installation with the grille sitting close to the finished surface.\u003c\/p\u003e\n\u003ch3\u003eSupply and finish\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels. The white metal grille is paintable to match the wall or ceiling.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692474507453,"sku":"IW150MKII","price":2014.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw-150mkii-yxhwi.jpg?v=1789374036"},{"product_id":"diffusore-surround-mk-sound-s150t","title":"MK Sound S150T Surround","description":"\u003ch2\u003e150 Series THX Tripole for direct and diffuse surround at once\u003c\/h2\u003e\n\u003cp\u003eMK Sound S150T is a Tripole surround with a 5.25-inch front woofer, 1.1-inch tweeter and two 3.5-inch side drivers.\u003c\/p\u003e\n\u003cp\u003eMK Sound S150T belongs to the 150 Series and is designed for side or rear channels in 150 Series systems. Proprietary Tripole technology combines direct and lateral radiation to preserve localisation and envelopment close to listeners. The product is supplied as a pair. The proprietary Tripole configuration conceptually combines several radiating sources in one cabinet: the front supplies localised information while the sides broaden ambient energy. It addresses the unusually close placement of surround speakers relative to listeners.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary Tripole technology.\u003c\/li\u003e\n\u003cli\u003e5.25-inch front woofer.\u003c\/li\u003e\n\u003cli\u003e1.1-inch front tweeter.\u003c\/li\u003e\n\u003cli\u003eTwo 3.5-inch side drivers.\u003c\/li\u003e\n\u003cli\u003e80 Hz-20 kHz response and 86 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power of 5-200 W.\u003c\/li\u003e\n\u003cli\u003eTimbre matched to S150.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\u003cp\u003eThe front uses a 5.25-inch woofer and 1.1-inch tweeter, while two 3.5-inch side drivers generate the diffuse component. Response is 80 Hz-20 kHz, with 86 dB sensitivity and 4-ohm impedance. S150T uses the same high-frequency design as the S150 family to preserve voice matching with the three front channels. Twin 3.5-inch side drivers work with the front section without turning the surround into an easily identifiable point source.\u003c\/p\u003e\n\u003ch3\u003eTripole technology\u003c\/h3\u003e\n\u003cp\u003eThe surround field combines precise discrete effects with a broader ambient component than a conventional monopole. This approach is especially useful on side or rear walls close to seating. The pair is intended for side or rear walls. Each speaker weighs 4.8 kg and the tapered shape reduces its frontal footprint; installation can spread effects across several seats while retaining both precision and ambience.\u003c\/p\u003e\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\u003cp\u003eDrivers and crossover technology are matched to S150 to preserve timbre consistency between front and surround channels. Integration is designed so the lateral drivers are not perceived as separate sources.\u003c\/p\u003e\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe cabinet measures approximately 27 x 26.5\/16.5 x 15 cm and weighs 4.8 kg per speaker. Its tapered shape is specific to wall-mounted surround use.\u003c\/p\u003e\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\u003cp\u003eThe sealed cabinet houses dedicated side sections. It is available in Black or White Satin and is supplied as a pair.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"White","offer_id":41692474572989,"sku":"S150T","price":2839.83,"currency_code":"EUR","in_stock":true},{"title":"(1) Black","offer_id":41692474605757,"sku":"S150T","price":2839.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-s150t-surround-bianco-zpa7v.jpg?v=1789133206"},{"product_id":"diffusore-mk-sound-mp150-mkii-c-r","title":"MK Sound MP150 MKII (Right\/Center)","description":"\u003ch2\u003e150 Series sound in an on-wall monitor just over 10 cm deep\u003c\/h2\u003e\n\u003cp\u003eMK Sound MP150 is the 150 Series on-wall monitor with twin 5.25-inch woofers, three 1-inch tweeters and 77 Hz-20 kHz response.\u003c\/p\u003e\n\u003cp\u003eMK Sound MP150 belongs to the 150 Series and is designed for front and centre channels where wall mounting is a priority. It brings 150 Series components and technologies into a shallower cabinet with a crossover optimised for wall-boundary effects. Right\/C and Left\/C variants are mirror-imaged, allowing the correct geometry to be maintained at either side of the screen or in centre-channel use. The low-compression professional tweeter follows the same principle used in MK Sound studio monitors; twin 5.25-inch woofers retain high dynamics within a shallow on-wall cabinet.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwin 5.25-inch woofers.\u003c\/li\u003e\n\u003cli\u003eArray of three 1-inch tweeters.\u003c\/li\u003e\n\u003cli\u003e77 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power of 25-400 W.\u003c\/li\u003e\n\u003cli\u003ePhase-Focused Crossover optimised for wall mounting.\u003c\/li\u003e\n\u003cli\u003e6-degree angled baffle.\u003c\/li\u003e\n\u003cli\u003eMirror-image Right\/C and Left\/C versions.\u003c\/li\u003e\n\u003cli\u003eBlack Satin or White Satin finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\u003cp\u003eThe configuration uses twin 5.25-inch woofers and a vertical array of three 1-inch soft-dome tweeters. Rated response is 77 Hz-20 kHz, sensitivity is 90 dB and nominal impedance is 4 ohms. The model is offered in mirror-image Right\/C and Left\/C variants: each variant is one individual loudspeaker, selected according to its position relative to the screen. A stereo front therefore requires two complementary units.\u003c\/p\u003e\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\u003cp\u003eMirror-image versions optimise placement at either side of the screen and maintain symmetry across the LCR front stage. MP150 can also serve as a centre speaker while retaining the same tonal signature as the main channels. The 150 Series uses a triple-tweeter array and twin woofers with a low crossover point, designed for wide horizontal dispersion and more controlled vertical dispersion to reduce floor and ceiling reflections.\u003c\/p\u003e\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\u003cp\u003eThe Phase-Focused Crossover is designed to compensate for wall placement while preserving the timing, focus and intelligibility associated with the 150 Series.\u003c\/p\u003e\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe cabinet uses a 6-degree angled baffle and weighs 7.9 kg. Its shallow depth allows installation beside a screen without the bulk of a conventional monitor.\u003c\/p\u003e\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\u003cp\u003eConstruction retains professional components in a domestic on-wall format. Available finishes are Black Satin or White Satin.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Black","offer_id":41729846051005,"sku":"","price":2014.46,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41729846083773,"sku":"","price":2014.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-mp150-mkii-right-center-nero-yhgcx.jpg?v=1789131358"},{"product_id":"diffusore-mk-sound-lcr950-left-right-center","title":"MK Sound LCR950 Speaker","description":"\u003ch2\u003eTwin woofers and professional tweeter for a precise THX Select2 front stage\u003c\/h2\u003e\n\n\u003cp\u003eMK Sound LCR950 is a 950 Series loudspeaker with twin 5.25-inch woofers, a professional 1-inch tweeter, 90 dB sensitivity and 80 Hz-20 kHz response.\u003c\/p\u003e\n\n\u003cp\u003eMK Sound LCR950 belongs to the 950 Series and is designed for LCR front-channel duties in THX Select2 systems. It shares driver and crossover design principles with MK Sound professional monitors. The professional tweeter is derived from MK Sound studio monitors and is engineered for high power handling with low dynamic compression, keeping the top end open at sustained levels.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eTwin 5.25-inch polypropylene woofers.\u003c\/li\u003e\n\n\u003cli\u003eProfessional 1-inch soft-dome tweeter.\u003c\/li\u003e\n\n\u003cli\u003e80 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\n\u003cli\u003e950 Series Phase-Focused Crossover.\u003c\/li\u003e\n\n\u003cli\u003eRecommended amplifier power of 25-400 W.\u003c\/li\u003e\n\n\u003cli\u003eLCR configuration for left, centre or right use.\u003c\/li\u003e\n\n\u003cli\u003eSealed enclosure.\u003c\/li\u003e\n\n\u003cli\u003eBlack Satin finish.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\n\u003cp\u003eTwin 5.25-inch polypropylene woofers work with a 1-inch soft-dome tweeter developed for high output and low compression. Response is 80 Hz-20 kHz with 90 dB sensitivity. All 950 models share 5.25-inch polypropylene woofers and Phase-Focused Crossover technology, allowing a complete system to maintain the same voice across front and surround channels.\u003c\/p\u003e\n\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\n\u003cp\u003eThe LCR configuration allows the same model to be used left, centre or right for a coherent front stage. The 950 THX Select2 range is designed for flat on-axis response, wide horizontal dispersion and even coverage; its curved magnetic metal grille is engineered to remain acoustically inert.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\n\u003cp\u003eThe Phase-Focused Crossover integrates woofer and tweeter using frequency, time-domain and dispersion behaviour. Tuning maintains consistency between LCR950 and MP950.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\n\u003cp\u003eThe cabinet measures 40.6 x 17.5 x 18.8 cm and weighs 6.9 kg; it can be used on a stand or in dedicated structures.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\n\u003cp\u003eSealed enclosure and magnetic grille in Black Satin. The 950 Series is designed to work as an integrated system with an MK Sound subwoofer, keeping the front stage compact without asking the satellites to reproduce the deepest bass. The design is intended to work as part of a matched 950 Series system with an MK Sound subwoofer.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692475261117,"sku":"","price":982.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-lcr950-speaker-z2x17.jpg?v=1789132261"},{"product_id":"diffusore-mk-sound-s300t-surround","title":"MK Sound S300T Surround","description":"\u003ch2\u003eS300 Tripole for a wide, perfectly integrated reference surround field\u003c\/h2\u003e\n\u003cp\u003eMK Sound S300T is the 300 Series Tripole surround with a 6.5-inch front woofer, front tweeter and four 3.5-inch side drivers. The product is supplied as a pair.\u003c\/p\u003e\n\u003cp\u003eMK Sound S300T belongs to the 300 Series and is designed for reference side and rear surround channels. It uses S300 driver and crossover technology while adding dedicated lateral sections for surround diffusion. MK Sound developed the Tripole configuration to combine pinpoint rear-event localisation with a broad ambient field. The front section uses S300 driver and crossover technology, while the lateral chambers are isolated from the main volume.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e300 Series Tripole technology.\u003c\/li\u003e\n\u003cli\u003e6.5-inch front woofer.\u003c\/li\u003e\n\u003cli\u003e1-inch front tweeter.\u003c\/li\u003e\n\u003cli\u003eFour 3.5-inch side drivers.\u003c\/li\u003e\n\u003cli\u003e80 Hz-22 kHz response and 89 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power of 25-400 W.\u003c\/li\u003e\n\u003cli\u003eDedicated side chambers.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, Black or White Satin finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\u003cp\u003eThe front uses a 6.5-inch woofer and 1-inch tweeter; four 3.5-inch side drivers broaden the surround field. Response is 80 Hz-22 kHz. Four 3.5-inch side drivers, two per side, complement the 6.5-inch front woofer and 1-inch tweeter. Impedance is 4 ohms, sensitivity is 89 dB and recommended amplifier power is 25-400 W.\u003c\/p\u003e\n\u003ch3\u003eTripole technology\u003c\/h3\u003e\n\u003cp\u003eThe Tripole configuration adds lateral diffusion without sacrificing precise direct events, ideal for reference rooms with several seating rows. S300T is supplied as a pair. The two units can be placed at the sides or rear of the room; the integrated bracket and tapered cabinet are intended for stable wall installation in reference surround systems.\u003c\/p\u003e\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\u003cp\u003eThe 300 Series uses crossover networks and driver geometry designed for time-domain accuracy, controlled dispersion and consistency across the range.\u003c\/p\u003e\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\u003cp\u003eApproximate dimensions are 34.5 x 34.5\/22.7 x 18 cm; weight 12 kg. Construction is designed to maintain the correct driver geometry in the intended position.\u003c\/p\u003e\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\u003cp\u003eRigid construction and separate driver mounts reduce mechanical cabinet noise. Black or White Satin finish. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"White","offer_id":41692475556029,"sku":"","price":5018.67,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":41692475588797,"sku":"","price":5018.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-s300t-surround-bianco-zxbrh.jpg?v=1789133689"},{"product_id":"diffusore-mk-sound-mp300-left","title":"MK Sound MP300 (Left\/Center)","description":"\u003ch2\u003eS300 on-wall monitor with reference performance in a shallower cabinet\u003c\/h2\u003e\n\u003cp\u003eMK Sound MP300 is a 300 Series loudspeaker with twin 6.5-inch woofers, three 1-inch tweeters, 80 Hz-22 kHz response and 92 dB sensitivity.\u003c\/p\u003e\n\u003cp\u003eMK Sound MP300 belongs to the 300 Series and is designed for reference on-wall installations. It is the shallower version of S300 with crossover optimisation for wall mounting. Right\/C and Left\/C variants are mirror-imaged, allowing the correct geometry to be maintained at either side of the screen or in centre-channel use. The monitor uses twin 6.5-inch glass-fibre woofers and three 1-inch tweeters. With 92 dB sensitivity, 4-ohm impedance and recommended amplifier power of 25-500 W, it retains S300 reserve in a shallower enclosure.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwin 6.5-inch woofers.\u003c\/li\u003e\n\u003cli\u003eArray of three 1-inch tweeters.\u003c\/li\u003e\n\u003cli\u003e80 Hz-22 kHz response and 92 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power of 25-500 W.\u003c\/li\u003e\n\u003cli\u003e300 Series crossover technology.\u003c\/li\u003e\n\u003cli\u003eOptimised for on-wall mounting.\u003c\/li\u003e\n\u003cli\u003eRigid, damped construction.\u003c\/li\u003e\n\u003cli\u003eBlack or White Satin finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\u003cp\u003eTwin 6.5-inch woofers and three 1-inch tweeters are mounted on rigid structures to reduce coloration and vibration. Right\/C and Left\/C are mirror-image variants sold individually. The baffle is angled by 5 degrees and the geometry places the monitor close to the screen without losing the front-array organisation of the 300 Series.\u003c\/p\u003e\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\u003cp\u003eThe shallow cabinet brings S300 precision close to the screen without the depth of the stand-mount monitor. The series uses separate die-cast mounting structures for woofers and tweeters, rear-mounted to the baffle to mechanically isolate the drivers from the cabinet and reduce reflections or colouration around the edges.\u003c\/p\u003e\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\u003cp\u003eThe 300 Series uses crossover networks and driver geometry designed for time-domain accuracy, controlled dispersion and consistency across the range.\u003c\/p\u003e\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\u003cp\u003eApproximate dimensions are 39.4 x 33.9 x 17.7\/14.2 cm; weight 12 kg. Construction is designed to maintain the correct driver geometry in the intended position.\u003c\/p\u003e\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\u003cp\u003eRigid construction and separate driver mounts reduce mechanical cabinet noise. Black or White Satin finish.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Black","offer_id":41692475621565,"sku":"","price":3539.3,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41714604179645,"sku":"","price":3539.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-mp300-left-center-nero-1g5a9.jpg?v=1789378009"},{"product_id":"diffusore-mk-sound-mp150-mkii-left","title":"MK Sound MP150 MKII (Left\/Center)","description":"\u003ch2\u003e150 Series sound in an on-wall monitor just over 10 cm deep\u003c\/h2\u003e\n\u003cp\u003eMK Sound MP150 is the 150 Series on-wall monitor with twin 5.25-inch woofers, three 1-inch tweeters and 77 Hz-20 kHz response.\u003c\/p\u003e\n\u003cp\u003eMK Sound MP150 belongs to the 150 Series and is designed for front and centre channels where wall mounting is a priority. It brings 150 Series components and technologies into a shallower cabinet with a crossover optimised for wall-boundary effects. Right\/C and Left\/C variants are mirror-imaged, allowing the correct geometry to be maintained at either side of the screen or in centre-channel use. The low-compression professional tweeter follows the same principle used in MK Sound studio monitors; twin 5.25-inch woofers retain high dynamics within a shallow on-wall cabinet.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwin 5.25-inch woofers.\u003c\/li\u003e\n\u003cli\u003eArray of three 1-inch tweeters.\u003c\/li\u003e\n\u003cli\u003e77 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power of 25-400 W.\u003c\/li\u003e\n\u003cli\u003ePhase-Focused Crossover optimised for wall mounting.\u003c\/li\u003e\n\u003cli\u003e6-degree angled baffle.\u003c\/li\u003e\n\u003cli\u003eMirror-image Right\/C and Left\/C versions.\u003c\/li\u003e\n\u003cli\u003eBlack Satin or White Satin finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\u003cp\u003eThe configuration uses twin 5.25-inch woofers and a vertical array of three 1-inch soft-dome tweeters. Rated response is 77 Hz-20 kHz, sensitivity is 90 dB and nominal impedance is 4 ohms. The model is offered in mirror-image Right\/C and Left\/C variants: each variant is one individual loudspeaker, selected according to its position relative to the screen. A stereo front therefore requires two complementary units.\u003c\/p\u003e\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\u003cp\u003eMirror-image versions optimise placement at either side of the screen and maintain symmetry across the LCR front stage. MP150 can also serve as a centre speaker while retaining the same tonal signature as the main channels. The 150 Series uses a triple-tweeter array and twin woofers with a low crossover point, designed for wide horizontal dispersion and more controlled vertical dispersion to reduce floor and ceiling reflections.\u003c\/p\u003e\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\u003cp\u003eThe Phase-Focused Crossover is designed to compensate for wall placement while preserving the timing, focus and intelligibility associated with the 150 Series.\u003c\/p\u003e\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe cabinet uses a 6-degree angled baffle and weighs 7.9 kg. Its shallow depth allows installation beside a screen without the bulk of a conventional monitor.\u003c\/p\u003e\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\u003cp\u003eConstruction retains professional components in a domestic on-wall format. Available finishes are Black Satin or White Satin.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Black","offer_id":41729848672445,"sku":"","price":2014.46,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41729848705213,"sku":"","price":2014.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-mp150-mkii-left-center-nero-1as92.jpg?v=1789377785"},{"product_id":"subwoofer-mk-sound-iw28s","title":"MK Sound IW28S","description":"\u003ch2\u003eDual eight-inch in-wall bass for deep low frequencies without floor space\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW28S is a passive in-wall subwoofer with dual 8-inch woofers, 28-200 Hz ±3 dB response and 95 mm mounting depth; it requires VA500.\u003c\/p\u003e\n\u003cp\u003eIW28S transfers V Series subwoofer experience into a fully concealed cabinet. Its dual drivers are adapted to the demands of a very shallow volume and are mounted in contact with both front baffle and rear of the box to increase mechanical stability.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 8-inch stiff paper-pulp woofers.\u003c\/li\u003e\n\u003cli\u003e28-200 Hz ±3 dB response.\u003c\/li\u003e\n\u003cli\u003e4-ohm nominal impedance.\u003c\/li\u003e\n\u003cli\u003e95 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eHigh-damping cones and aluminium shorting rings.\u003c\/li\u003e\n\u003cli\u003ePaintable white metal grille.\u003c\/li\u003e\n\u003cli\u003eRequires external VA500 amplifier.\u003c\/li\u003e\n\u003cli\u003e11 kg weight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eTwin 8-inch woofers use very stiff paper-pulp cones with high internal damping. Aluminium shorting rings reduce voice-coil distortion at long excursion, while the ferrite magnet system dissipates heat to limit power compression.\u003c\/p\u003e\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eIW28S is passive: amplification is provided by the dedicated VA500, delivering 500 W continuous into 4 ohms and 800 W peak. Separating electronics keeps controls and mains power in the rack, leaving only cabinet and drivers inside the wall.\u003c\/p\u003e\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eIts 28-200 Hz response allows the system to reproduce LFE or extend the low end of in-wall speakers and satellites. The sealed structure and driver geometry are designed to preserve speed and control despite the restricted volume available within a wall.\u003c\/p\u003e\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eVA500 provides line-level input, pass-through, volume, phase, 60-200 Hz crossover and three Room Adaptation settings. The combination compensates for placement and integrates IW28S with the main system without requiring access to the in-wall cavity.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe grille measures 622 x 312 mm, wall cut-out is 580 x 270 mm and mounting depth is 95 mm. Weight is 11 kg. The white metal grille is paintable so the visible element can match the surface while the acoustic enclosure remains concealed. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692476833981,"sku":"IW28S","price":1196.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw28s-y14rf.jpg?v=1789130448"},{"product_id":"diffusore-mk-sound-iw-300mkii","title":"MK Sound IW-300MKII","description":"\u003ch2\u003eMonitor performance integrated directly into the wall\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW300 is an architectural loudspeaker with twin 6.5-inch glass-fibre woofers and three 1-inch soft fabric dome tweeters, 80 Hz-22 kHz response and 93 dB sensitivity. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003cp\u003eIt is designed for reference concealed LCR fronts and cinema rooms. The architectural range uses driver and crossover technology from MK Sound monitors so visible and concealed speakers can be mixed without changing tonal character. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/li\u003e\n\u003cli\u003eMid\/bass section: twin 6.5-inch glass-fibre woofers.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency section: three 1-inch soft fabric dome tweeters.\u003c\/li\u003e\n\u003cli\u003e80 Hz-22 kHz response and 93 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power 25-500 W.\u003c\/li\u003e\n\u003cli\u003e120 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eLow-profile paintable metal grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and response\u003c\/h3\u003e\n\u003cp\u003eThe system uses twin 6.5-inch glass-fibre woofers with an array of three 1-inch soft fabric dome tweeters. Rated response is 80 Hz-22 kHz, with 93 dB sensitivity and recommended amplifier power of 25-500 W, using S300 Series driver and crossover technology.\u003c\/p\u003e\n\u003ch3\u003eArchitectural integration\u003c\/h3\u003e\n\u003cp\u003eThe IW range uses steel baffles and low-profile metal grilles to reinforce the wall, reduce vibration and leave only the required surface visible. Grilles can be painted to match the room finish.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe baffle measures 423 x 338 mm, wall cut-out is 401 x 316 mm and required depth is 120 mm; weight is 10 kg. The IW mounting system is designed for stable installation with the grille sitting close to the finished surface.\u003c\/p\u003e\n\u003ch3\u003eSupply and finish\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels. The white metal grille is paintable to match the wall or ceiling.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692476899517,"sku":"IW300","price":3346.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw-300mkii-z7t1r.jpg?v=1789132431"},{"product_id":"diffusore-mk-sound-iw950mkii","title":"MK Sound IW950MKII","description":"\u003ch2\u003eMonitor performance integrated directly into the wall\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW950 is an architectural loudspeaker with twin 5.25-inch polypropylene woofers and 1-inch soft fabric dome tweeter, 80 Hz-20 kHz response and 90 dB sensitivity. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003cp\u003eIt is designed for concealed front and surround channels using 950 Series technology. The architectural range uses driver and crossover technology from MK Sound monitors so visible and concealed speakers can be mixed without changing tonal character. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/li\u003e\n\u003cli\u003eMid\/bass section: twin 5.25-inch polypropylene woofers.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency section: 1-inch soft fabric dome tweeter.\u003c\/li\u003e\n\u003cli\u003e80 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power 25-400 W.\u003c\/li\u003e\n\u003cli\u003e95 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eLow-profile paintable metal grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and response\u003c\/h3\u003e\n\u003cp\u003eThe system uses twin 5.25-inch polypropylene woofers with a 1-inch soft fabric dome tweeter. Rated response is 80 Hz-20 kHz, with 90 dB sensitivity and recommended amplifier power of 25-400 W; voicing is derived from the 950 Series.\u003c\/p\u003e\n\u003ch3\u003eArchitectural integration\u003c\/h3\u003e\n\u003cp\u003eThe IW range uses steel baffles and low-profile metal grilles to reinforce the wall, reduce vibration and leave only the required surface visible. Grilles can be painted to match the room finish.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe baffle measures 489 x 234 mm, wall cut-out is 467 x 212 mm and required depth is 95 mm; weight is 8 kg. The IW mounting system is designed for stable installation with the grille sitting close to the finished surface.\u003c\/p\u003e\n\u003ch3\u003eSupply and finish\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels. The white metal grille is paintable to match the wall or ceiling.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692476932285,"sku":"IW950","price":1283.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw950mkii-zd2zl.jpg?v=1789132647"},{"product_id":"diffusore-mk-sound-iw85mkii","title":"MK Sound IW85MKII","description":"\u003ch2\u003eMonitor performance integrated directly into the wall\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW85 is an architectural loudspeaker with 5.25-inch polypropylene woofer and 1-inch soft fabric dome tweeter, 85 Hz-20 kHz response and 88 dB sensitivity. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003cp\u003eIt is designed for stereo, surround and versatile architectural installations. The architectural range uses driver and crossover technology from MK Sound monitors so visible and concealed speakers can be mixed without changing tonal character. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/li\u003e\n\u003cli\u003eMid\/bass section: 5.25-inch polypropylene woofer.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency section: 1-inch soft fabric dome tweeter.\u003c\/li\u003e\n\u003cli\u003e85 Hz-20 kHz response and 88 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power 25-200 W.\u003c\/li\u003e\n\u003cli\u003e93 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eLow-profile paintable metal grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and response\u003c\/h3\u003e\n\u003cp\u003eThe system uses a 5.25-inch polypropylene woofer with a 1-inch soft fabric dome tweeter. Rated response is 85 Hz-20 kHz, with 88 dB sensitivity and recommended amplifier power of 25-200 W; tuning supports matching with other MK Sound speakers.\u003c\/p\u003e\n\u003ch3\u003eArchitectural integration\u003c\/h3\u003e\n\u003cp\u003eThe IW range uses steel baffles and low-profile metal grilles to reinforce the wall, reduce vibration and leave only the required surface visible. Grilles can be painted to match the room finish.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe baffle measures 264 x 169 mm, wall cut-out is 239 x 152 mm and required depth is 93 mm; weight is 4.1 kg. The IW mounting system is designed for stable installation with the grille sitting close to the finished surface.\u003c\/p\u003e\n\u003ch3\u003eSupply and finish\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels. The white metal grille is paintable to match the wall or ceiling.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692476965053,"sku":"IW85mkII","price":895.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw85mkii-yqoxe.jpg?v=1789131915"},{"product_id":"diffusore-mk-sound-iw5mkii","title":"MK Sound IW5MKII","description":"\u003ch2\u003eThe compact architectural loudspeaker from the M Series\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW5 is an architectural loudspeaker with 4-inch bass\/midrange driver and 1-inch soft fabric dome tweeter, 100 Hz-20 kHz response and 85 dB sensitivity. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003cp\u003eIt is designed for compact in-ceiling\/in-wall coverage and multi-room systems. The architectural range uses driver and crossover technology from MK Sound monitors so visible and concealed speakers can be mixed without changing tonal character. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/li\u003e\n\u003cli\u003eMid\/bass section: 4-inch bass\/midrange driver.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency section: 1-inch soft fabric dome tweeter.\u003c\/li\u003e\n\u003cli\u003e100 Hz-20 kHz response and 85 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power 25-125 W.\u003c\/li\u003e\n\u003cli\u003e103 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eLow-profile paintable metal grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and response\u003c\/h3\u003e\n\u003cp\u003eThe system uses a 4-inch polymer-coated bass\/midrange driver with a 1-inch soft fabric dome tweeter. Rated response is 100 Hz-20 kHz, with 85 dB sensitivity and recommended amplifier power of 25-125 W; voicing follows the M Series for consistent integration.\u003c\/p\u003e\n\u003ch3\u003eArchitectural integration\u003c\/h3\u003e\n\u003cp\u003eThe IW range uses steel baffles and low-profile metal grilles to reinforce the wall, reduce vibration and leave only the required surface visible. Grilles can be painted to match the room finish.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe baffle measures 220 mm diagonale, wall cut-out is 164 x 124 mm and required depth is 103 mm; weight is 2.4 kg. The IW mounting system is designed for stable installation with the grille sitting close to the finished surface.\u003c\/p\u003e\n\u003ch3\u003eSupply and finish\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels. The white metal grille is paintable to match the wall or ceiling.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692476997821,"sku":"IW5","price":654.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw5mkii-zbtqa.jpg?v=1789132586"},{"product_id":"diffusore-mk-sound-iw95mkii","title":"MK Sound IW95MKII","description":"\u003ch2\u003eMonitor performance integrated directly into the wall\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW95 is an architectural loudspeaker with 6.5-inch polypropylene woofer and 1-inch soft fabric dome tweeter, 80 Hz-20 kHz response and 91 dB sensitivity. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003cp\u003eIt is designed for complex installations requiring greater dynamics. The architectural range uses driver and crossover technology from MK Sound monitors so visible and concealed speakers can be mixed without changing tonal character. The loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels.\u003c\/li\u003e\n\u003cli\u003eMid\/bass section: 6.5-inch polypropylene woofer.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency section: 1-inch soft fabric dome tweeter.\u003c\/li\u003e\n\u003cli\u003e80 Hz-20 kHz response and 91 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power 25-300 W.\u003c\/li\u003e\n\u003cli\u003e93 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eLow-profile paintable metal grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and response\u003c\/h3\u003e\n\u003cp\u003eThe system uses a 6.5-inch polypropylene woofer with a 1-inch soft fabric dome tweeter. Rated response is 80 Hz-20 kHz, with 91 dB sensitivity and recommended amplifier power of 25-300 W; its design descends from MK Sound professional-monitor principles.\u003c\/p\u003e\n\u003ch3\u003eArchitectural integration\u003c\/h3\u003e\n\u003cp\u003eThe IW range uses steel baffles and low-profile metal grilles to reinforce the wall, reduce vibration and leave only the required surface visible. Grilles can be painted to match the room finish.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe baffle measures 309 x 232 mm, wall cut-out is 273 x 189 mm and required depth is 93 mm; weight is 4.6 kg. The IW mounting system is designed for stable installation with the grille sitting close to the finished surface.\u003c\/p\u003e\n\u003ch3\u003eSupply and finish\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is sold individually; two units are required for a stereo pair and additional units for more channels. The white metal grille is paintable to match the wall or ceiling.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692477030589,"sku":"IW95","price":1122.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw95mkii-tkt9b.jpg?v=1789122970"},{"product_id":"diffusore-mk-sound-mp950","title":"MK Sound MP950","description":"\u003ch2\u003e950 Series performance in a 10 cm-deep on-wall format\u003c\/h2\u003e\n\n\u003cp\u003eMK Sound MP950 is a 950 Series loudspeaker with twin 5.25-inch woofers, a professional 1-inch tweeter, 90 dB sensitivity and 80 Hz-20 kHz response.\u003c\/p\u003e\n\n\u003cp\u003eMK Sound MP950 belongs to the 950 Series and is designed for shallow on-wall installations timbre-matched to the 950 Series. The crossover compensates for wall-boundary effects and the integrated bracket supports direct vertical mounting. The professional tweeter is shared with the 950 Series and derived from MK Sound studio monitors; it is developed for high dynamics and low compression as listening level rises.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eTwin 5.25-inch polypropylene woofers.\u003c\/li\u003e\n\n\u003cli\u003eProfessional 1-inch soft-dome tweeter.\u003c\/li\u003e\n\n\u003cli\u003e80 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\n\u003cli\u003e950 Series Phase-Focused Crossover.\u003c\/li\u003e\n\n\u003cli\u003eRecommended amplifier power of 25-200 W.\u003c\/li\u003e\n\n\u003cli\u003eIntegrated bracket for vertical wall mounting.\u003c\/li\u003e\n\n\u003cli\u003eSealed enclosure.\u003c\/li\u003e\n\n\u003cli\u003eBlack or White satin finishes.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\n\u003cp\u003eTwin 5.25-inch polypropylene woofers work with a 1-inch soft-dome tweeter developed for high output and low compression. Response is 80 Hz-20 kHz with 90 dB sensitivity. The crossover specifically compensates for wall-boundary effects, addressing the reinforcement and response changes caused by close-to-wall placement so MP950 stays closer to its intended tuning.\u003c\/p\u003e\n\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\n\u003cp\u003eThe on-wall format brings 950 Series voicing to shallow installations without sacrificing matching with LCR950. Woofer, tweeter and Phase-Focused Crossover follow the LCR950 design philosophy, while the curved magnetic metal grille reduces vibration risk and keeps the front panel clean.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\n\u003cp\u003eThe Phase-Focused Crossover integrates woofer and tweeter using frequency, time-domain and dispersion behaviour. Tuning maintains consistency between LCR950 and MP950.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\n\u003cp\u003eThe cabinet measures 50 x 17.5 x 10 cm and weighs 6.6 kg; the integrated bracket is intended for vertical wall mounting.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\n\u003cp\u003eSealed enclosure and magnetic grille in Black Satin or White Satin. The range is designed as a voice-matched system so satellites and surrounds maintain a consistent transition between channels around the room. It remains voice-matched to the wider 950 Series system and its matching subwoofer integration.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Black","offer_id":41692477128893,"sku":"5704956161451","price":1010.73,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41692477161661,"sku":"5704956161475","price":1010.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-mp950-nero-1nj2p.jpg?v=1789378375"},{"product_id":"diffusore-mk-sound-mp300-right-center","title":"MK Sound MP300 (Right\/Center)","description":"\u003ch2\u003eS300 on-wall monitor with reference performance in a shallower cabinet\u003c\/h2\u003e\n\u003cp\u003eMK Sound MP300 is a 300 Series loudspeaker with twin 6.5-inch woofers, three 1-inch tweeters, 80 Hz-22 kHz response and 92 dB sensitivity.\u003c\/p\u003e\n\u003cp\u003eMK Sound MP300 belongs to the 300 Series and is designed for reference on-wall installations. It is the shallower version of S300 with crossover optimisation for wall mounting. Right\/C and Left\/C variants are mirror-imaged, allowing the correct geometry to be maintained at either side of the screen or in centre-channel use. The monitor uses twin 6.5-inch glass-fibre woofers and three 1-inch tweeters. With 92 dB sensitivity, 4-ohm impedance and recommended amplifier power of 25-500 W, it retains S300 reserve in a shallower enclosure.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwin 6.5-inch woofers.\u003c\/li\u003e\n\u003cli\u003eArray of three 1-inch tweeters.\u003c\/li\u003e\n\u003cli\u003e80 Hz-22 kHz response and 92 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power of 25-500 W.\u003c\/li\u003e\n\u003cli\u003e300 Series crossover technology.\u003c\/li\u003e\n\u003cli\u003eOptimised for on-wall mounting.\u003c\/li\u003e\n\u003cli\u003eRigid, damped construction.\u003c\/li\u003e\n\u003cli\u003eBlack or White Satin finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\u003cp\u003eTwin 6.5-inch woofers and three 1-inch tweeters are mounted on rigid structures to reduce coloration and vibration. Right\/C and Left\/C are mirror-image variants sold individually. The baffle is angled by 5 degrees and the geometry places the monitor close to the screen without losing the front-array organisation of the 300 Series.\u003c\/p\u003e\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\u003cp\u003eThe shallow cabinet brings S300 precision close to the screen without the depth of the stand-mount monitor. The series uses separate die-cast mounting structures for woofers and tweeters, rear-mounted to the baffle to mechanically isolate the drivers from the cabinet and reduce reflections or colouration around the edges.\u003c\/p\u003e\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\u003cp\u003eThe 300 Series uses crossover networks and driver geometry designed for time-domain accuracy, controlled dispersion and consistency across the range.\u003c\/p\u003e\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\u003cp\u003eApproximate dimensions are 39.4 x 33.9 x 17.7\/14.2 cm; weight 12 kg. Construction is designed to maintain the correct driver geometry in the intended position.\u003c\/p\u003e\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\u003cp\u003eRigid construction and separate driver mounts reduce mechanical cabinet noise. Black or White Satin finish.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Black","offer_id":41692477456573,"sku":"","price":3539.3,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41714881724605,"sku":"","price":3539.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-mp300-right-center-nero-1cjfa.jpg?v=1789377840"},{"product_id":"diffusore-mk-sound-iw-150t","title":"MK Sound IW-150T","description":"\u003ch2\u003eAn in-wall Tripole for invisible, enveloping surround\u003c\/h2\u003e\n\u003cp\u003eMK Sound IW150T is an architectural loudspeaker with 5.25-inch front coated glass-fibre woofer and 1.1-inch front tweeter plus two 2.35-inch side drivers, 60 Hz-20 kHz response and 85 dB sensitivity. The product is supplied as a pair.\u003c\/p\u003e\n\u003cp\u003eIt is designed for fully concealed Tripole side\/rear surround. The architectural range uses driver and crossover technology from MK Sound monitors so visible and concealed speakers can be mixed without changing tonal character. The product is supplied as a pair.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe product is supplied as a pair.\u003c\/li\u003e\n\u003cli\u003eMid\/bass section: 5.25-inch front coated glass-fibre woofer.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency section: 1.1-inch front tweeter plus two 2.35-inch side drivers.\u003c\/li\u003e\n\u003cli\u003e60 Hz-20 kHz response and 85 dB sensitivity.\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power 25-200 W.\u003c\/li\u003e\n\u003cli\u003e95 mm mounting depth.\u003c\/li\u003e\n\u003cli\u003eLow-profile paintable metal grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and response\u003c\/h3\u003e\n\u003cp\u003eThe front section uses a 5.25-inch coated glass-fibre woofer and 1.1-inch tweeter, while two 2.35-inch side drivers add the diffuse component. Rated response is 60 Hz-20 kHz, with 85 dB sensitivity and recommended amplifier power of 25-200 W.\u003c\/p\u003e\n\u003ch3\u003eArchitectural integration\u003c\/h3\u003e\n\u003cp\u003eCombining front and lateral radiation preserves localised discrete effects while creating a broader ambient field. It is intended for surround channels close to seating, where a simple monopole can become too easy to locate.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe baffle measures 354 x 311 mm, wall cut-out is 331 x 288 mm and required depth is 95 mm; weight is 6.8 kg. The IW mounting system is designed for stable installation with the grille sitting close to the finished surface.\u003c\/p\u003e\n\u003ch3\u003eSupply and finish\u003c\/h3\u003e\n\u003cp\u003eThe product is supplied as a pair. The white metal grille is paintable to match the wall or ceiling.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692477653181,"sku":"","price":2885.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-iw-150t-yztac.jpg?v=1789132080"},{"product_id":"diffusore-mk-sound-lcr750-left-right-center","title":"MK Sound LCR750 Speaker","description":"\u003ch2\u003eA THX Select LCR pair with twin woofers and Danish tweeter\u003c\/h2\u003e\n\n\u003cp\u003eMK Sound LCR750 is a THX Select 2-way LCR speaker with twin 5.25-inch woofers, a 1.1-inch tweeter and 80 Hz-20 kHz response.\u003c\/p\u003e\n\n\u003cp\u003eMK Sound LCR750 belongs to the 750 Series and is designed for left\/right front channels or LCR home cinema layouts. The 750 Series brings technologies derived from S150 into a compact, timbre-matched THX Select system. The product is supplied as a pair. The custom Danish-designed tweeter uses a vented 28 mm voice coil, coated soft dome and damped magnet system; its waveguide supports wide dispersion and smooth response.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e750 Series THX Select certification.\u003c\/li\u003e\n\n\u003cli\u003eTwin 5.25-inch coated glass-fibre woofers.\u003c\/li\u003e\n\n\u003cli\u003eDanish 1.1-inch soft-dome tweeter.\u003c\/li\u003e\n\n\u003cli\u003e80 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\n\u003cli\u003e1.6 kHz Phase-Focused Crossover.\u003c\/li\u003e\n\n\u003cli\u003eRecommended amplifier power of 25-400 W.\u003c\/li\u003e\n\n\u003cli\u003eSealed enclosure.\u003c\/li\u003e\n\n\u003cli\u003eSupplied as a pair in Black Vinyl.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\n\u003cp\u003eTwin 5.25-inch coated glass-fibre woofers are paired with a Danish 1.1-inch soft-dome tweeter. Response is 80 Hz-20 kHz, sensitivity is 90 dB and nominal impedance is 4 ohms. The woofers use stiff coated glass-fibre cones, aluminium distortion-reduction rings and vented voice coils and pole pieces to limit compression at high levels.\u003c\/p\u003e\n\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\n\u003cp\u003eThe LCR configuration allows the same design to be used left, right or centre while maintaining the same response and tonal character across all three positions. The ordersheet supplies LCR750 as a pair. The 750 Series evolves technology from the S150 family and meets THX Select requirements for flat on-axis response, wide horizontal dispersion and consistent tonal character across the listening area.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\n\u003cp\u003eThe 1.6 kHz Phase-Focused Crossover optimises the woofer-to-tweeter transition and helps maintain transient precision and consistent off-axis response.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\n\u003cp\u003eThe cabinet measures 40.8 x 17.8 x 22.3 cm and weighs 6.9 kg per speaker. The compact format supports stand, shelf or dedicated behind-screen installation.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\n\u003cp\u003eA sealed enclosure, gold-plated terminals and robust grille complete a construction intended for dedicated cinema rooms. Black Vinyl finish.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692477718717,"sku":"","price":1482.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-lcr750-speaker-088mm.jpg?v=1789375952"},{"product_id":"diffusore-mk-sound-lcr750c","title":"MK Sound LCR750C","description":"\u003ch2\u003eThe dedicated 750 Series centre with the same voice as the fronts\u003c\/h2\u003e\n\n\u003cp\u003eMK Sound LCR750C is the dedicated centre speaker of the 750 Series, acoustically identical to LCR750 with twin 5.25-inch woofers and a 1.1-inch tweeter.\u003c\/p\u003e\n\n\u003cp\u003eMK Sound LCR750C belongs to the 750 Series and is designed for centre-channel duties in 750 Series THX Select systems. It retains the LCR750 components and response but is configured specifically for centre placement below or behind the screen. The 28 mm tweeter uses a vented voice coil, coated soft dome, damped magnet system and integrated waveguide, developed to maintain dispersion and transient control.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDedicated centre channel for the 750 Series.\u003c\/li\u003e\n\n\u003cli\u003eAcoustically identical components to LCR750.\u003c\/li\u003e\n\n\u003cli\u003eTwin 5.25-inch woofers.\u003c\/li\u003e\n\n\u003cli\u003e1.1-inch soft-dome tweeter.\u003c\/li\u003e\n\n\u003cli\u003e80 Hz-20 kHz response and 90 dB sensitivity.\u003c\/li\u003e\n\n\u003cli\u003e1.6 kHz Phase-Focused Crossover.\u003c\/li\u003e\n\n\u003cli\u003eRecommended amplifier power of 25-400 W.\u003c\/li\u003e\n\n\u003cli\u003eSealed Black Vinyl enclosure.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eAcoustic design\u003c\/h3\u003e\n\n\u003cp\u003eThe front section uses twin 5.25-inch glass-fibre woofers and the Danish 1.1-inch soft-dome tweeter. Its 80 Hz-20 kHz response, 90 dB sensitivity and 4-ohm nominal impedance match LCR750. Twin glass-fibre woofers use aluminium distortion-reduction rings and ventilation systems to reduce compression when the centre channel must reproduce dialogue and effects at high level.\u003c\/p\u003e\n\n\u003ch3\u003eRole in the system\u003c\/h3\u003e\n\n\u003cp\u003eBecause it is acoustically identical to LCR750, the centre maintains coherent dialogue and pans as sound moves across the front stage. It is the natural choice when the centre must match front-channel dynamics. The 750 Series applies technology derived from S150 and meets THX Select requirements for on-axis response, horizontal dispersion and consistent tonal balance across a broad listening area.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and timbre matching\u003c\/h3\u003e\n\n\u003cp\u003eThe 1.6 kHz Phase-Focused Crossover is shared with LCR750 for consistent integration and time-domain behaviour across the three front channels.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and dimensions\u003c\/h3\u003e\n\n\u003cp\u003eDimensions are 40.8 x 17.8 x 22.3 cm and weight is 6.9 kg. The cabinet can sit below the screen or in dedicated furniture while keeping the front radiation unobstructed.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and finishes\u003c\/h3\u003e\n\n\u003cp\u003eThe sealed cabinet and robust grille are designed for sustained home cinema use. The ordersheet specifies Black Vinyl finish.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692477817021,"sku":"","price":741.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-lcr750c-1e2ut.jpg?v=1789377918"},{"product_id":"subwoofer-mk-sound-v10","title":"MK Sound V10+","description":"\u003ch2\u003eSealed 10-inch bass with 300 watts RMS in a compact cabinet\u003c\/h2\u003e\n\u003cp\u003eMK Sound V10+ is a sealed active subwoofer with a 10-inch long-throw driver, 24-200 Hz response and a 300 W RMS \/ 600 W peak amplifier.\u003c\/p\u003e\n\u003cp\u003eThe V+ Series combines a single long-throw woofer, sealed enclosure and switch-mode amplification in a footprint suited to living spaces. V10+ measures 34.5 x 34.5 x 34.5 cm and weighs 15.4 kg; the curved, tapered housing reduces visual impact without using a reflex port.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10-inch long-throw driver.\u003c\/li\u003e\n\u003cli\u003e300 W RMS \/ 600 W peak amplifier.\u003c\/li\u003e\n\u003cli\u003e24-200 Hz response.\u003c\/li\u003e\n\u003cli\u003eSealed enclosure.\u003c\/li\u003e\n\u003cli\u003ePanel-adjustable crossover and phase.\u003c\/li\u003e\n\u003cli\u003eHeadroom Limiter Maximizer and automatic power-on.\u003c\/li\u003e\n\u003cli\u003eBlack o White Satin finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eThe single 10-inch woofer works in a sealed enclosure to prioritise transient control and eliminate port noise. Long excursion moves substantial air from a compact cabinet, while the sealed alignment also supports a progressive blend with the main loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eThe power stage delivers 300 W RMS and 600 W peak. Headroom Limiter Maximizer dynamically supervises excursion and available headroom, helping film and music transients remain controlled when programme material demands sudden low-frequency energy.\u003c\/p\u003e\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eRated response is 24-200 Hz; the subwoofer can reproduce LFE in home cinema or extend low frequencies in a stereo system, with crossover and level set to match the main speakers.\u003c\/p\u003e\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eV10+ uses conventional low-pass, phase and level controls with RCA line-level input\/output. Automatic power-on reduces manual intervention and keeps the subwoofer ready when a signal arrives.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is sealed, with rounded lines and a square front; the available finish is Black o White Satin. Feet and power cable complete installation, while the 15.4 kg mass helps keep the enclosure stable during high-excursion passages. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Black","offer_id":41692477882557,"sku":"V10+BK","price":1682.22,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41692477849789,"sku":"V10+WH","price":1741.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-v10-nero-ymsln.jpg?v=1789131532"},{"product_id":"subwoofer-mk-sound-v12-1","title":"MK Sound V12+","description":"\u003ch2\u003eSealed 12-inch bass with 400 watts RMS in a compact cabinet\u003c\/h2\u003e\n\u003cp\u003eMK Sound V12+ is a sealed active subwoofer with a 12-inch long-throw driver, 20-200 Hz response and a 400 W RMS \/ 800 W peak amplifier with app control.\u003c\/p\u003e\n\u003cp\u003eThe V+ Series combines a single long-throw woofer, sealed enclosure and switch-mode amplification in a footprint suited to living spaces. V12+ measures 39.5 x 39.5 x 39.5 cm and weighs 21.2 kg; the curved, tapered housing reduces visual impact without using a reflex port.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12-inch long-throw driver.\u003c\/li\u003e\n\u003cli\u003e400 W RMS \/ 800 W peak amplifier.\u003c\/li\u003e\n\u003cli\u003e20-200 Hz response.\u003c\/li\u003e\n\u003cli\u003eSealed enclosure.\u003c\/li\u003e\n\u003cli\u003eM\u0026amp;K Professional App control with Manual EQ and Auto EQ.\u003c\/li\u003e\n\u003cli\u003eHeadroom Limiter Maximizer and automatic power-on.\u003c\/li\u003e\n\u003cli\u003eTHX Certified Select.\u003c\/li\u003e\n\u003cli\u003eBlack o White Satin finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eThe single 12-inch woofer works in a sealed enclosure to prioritise transient control and eliminate port noise. Long excursion moves substantial air from a compact cabinet, while the sealed alignment also supports a progressive blend with the main loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eThe power stage delivers 400 W RMS and 800 W peak. Headroom Limiter Maximizer dynamically supervises excursion and available headroom, helping film and music transients remain controlled when programme material demands sudden low-frequency energy.\u003c\/p\u003e\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eTHX Certified Select verifies the model against the reference-level requirements of its THX class. Rated response is 20-200 Hz; the subwoofer can reproduce LFE in home cinema or extend low frequencies in a stereo system, with crossover and level set to match the main speakers.\u003c\/p\u003e\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eV12+ and V15+ are configured through the M\u0026amp;K Professional App: Bluetooth is used for control rather than audio streaming. The app adjusts volume, crossover, delay and phase and provides four Manual EQ bands plus Auto EQ based on measurements around the listening position.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is sealed, with rounded lines and a square front; the available finish is Black o White Satin. Feet and power cable complete installation, while the 21.2 kg mass helps keep the enclosure stable during high-excursion passages. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Black","offer_id":41692477948093,"sku":"V12+BK","price":2322.23,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":41692477915325,"sku":"V12+WH","price":2399.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-v12-nero-xylzv.jpg?v=1789130333"},{"product_id":"subwoofer-mk-sound-v15","title":"MK Sound V15+","description":"\u003ch2\u003eSealed 15-inch bass with 500 watts RMS in a compact cabinet\u003c\/h2\u003e\n\u003cp\u003eMK Sound V15+ is a sealed active subwoofer with a 15-inch long-throw driver, 20-200 Hz response and a 500 W RMS \/ 1000 W peak amplifier with app control.\u003c\/p\u003e\n\u003cp\u003eThe V+ Series combines a single long-throw woofer, sealed enclosure and switch-mode amplification in a footprint suited to living spaces. V15+ measures 47 x 47 x 47 cm and weighs 30.7 kg; the curved, tapered housing reduces visual impact without using a reflex port.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15-inch long-throw driver.\u003c\/li\u003e\n\u003cli\u003e500 W RMS \/ 1000 W peak amplifier.\u003c\/li\u003e\n\u003cli\u003e20-200 Hz response.\u003c\/li\u003e\n\u003cli\u003eSealed enclosure.\u003c\/li\u003e\n\u003cli\u003eM\u0026amp;K Professional App control with Manual EQ and Auto EQ.\u003c\/li\u003e\n\u003cli\u003eHeadroom Limiter Maximizer and automatic power-on.\u003c\/li\u003e\n\u003cli\u003eTHX Certified Ultra.\u003c\/li\u003e\n\u003cli\u003eBlack Satin finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eThe single 15-inch woofer works in a sealed enclosure to prioritise transient control and eliminate port noise. Long excursion moves substantial air from a compact cabinet, while the sealed alignment also supports a progressive blend with the main loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eThe power stage delivers 500 W RMS and 1000 W peak. Headroom Limiter Maximizer dynamically supervises excursion and available headroom, helping film and music transients remain controlled when programme material demands sudden low-frequency energy.\u003c\/p\u003e\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eTHX Certified Ultra verifies the model against the reference-level requirements of its THX class. Rated response is 20-200 Hz; the subwoofer can reproduce LFE in home cinema or extend low frequencies in a stereo system, with crossover and level set to match the main speakers.\u003c\/p\u003e\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eV12+ and V15+ are configured through the M\u0026amp;K Professional App: Bluetooth is used for control rather than audio streaming. The app adjusts volume, crossover, delay and phase and provides four Manual EQ bands plus Auto EQ based on measurements around the listening position.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is sealed, with rounded lines and a square front; the available finish is Black Satin. Feet and power cable complete installation, while the 30.7 kg mass helps keep the enclosure stable during high-excursion passages. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692477980861,"sku":"","price":3591.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-v15-zqjaw.jpg?v=1789133356"},{"product_id":"subwoofer-mk-sound-c15s-va500-blue","title":"MK Sound C15S+VA500 Blue","description":"\u003ch2\u003eA 15-inch custom-install subwoofer with dedicated external electronics\u003c\/h2\u003e\n\n\u003cp\u003eMK Sound C15S with VA500 Blue Edition combines a sealed passive 15-inch subwoofer and an external Class D amplifier rated at 500 W RMS \/ 800 W peak.\u003c\/p\u003e\n\n\u003cp\u003eC15S is designed for custom cinema rooms, behind-screen installations and positions where a large driver is required with limited depth. The cabinet measures 72.5 x 49.8 x 29.8 cm and works with the dedicated VA500 Blue amplifier, which can be installed separately in the equipment rack.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e15-inch stiff paper-pulp woofer.\u003c\/li\u003e\n  \u003cli\u003eSealed cabinet only 298 mm deep.\u003c\/li\u003e\n  \u003cli\u003e22-200 Hz ±3 dB response.\u003c\/li\u003e\n  \u003cli\u003eDriver handling: 500 W rated \/ 800 W long-term.\u003c\/li\u003e\n  \u003cli\u003eVA500 Blue: 500 W RMS \/ 800 W peak Class D.\u003c\/li\u003e\n  \u003cli\u003eThree Room Adaptation settings.\u003c\/li\u003e\n  \u003cli\u003eRCA line-level input\/output and 60-200 Hz crossover.\u003c\/li\u003e\n  \u003cli\u003eBass Brace brackets and stacking couplers included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eThe 15-inch driver uses a stiff paper-pulp cone with a reinforced glass-fibre dust cap. The sealed cabinet uses 1-inch MDF with internal bracing, allowing the large radiating area to work with lower unwanted vibration at the sound-pressure levels demanded by the LFE channel.\u003c\/p\u003e\n\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eVA500 Blue delivers 500 W RMS and 800 W peak from a Class D module. Dynamic headroom control monitors the signal to limit audible clipping while preserving dynamic range; separating amplifier and cabinet also simplifies cooling, adjustment and servicing in a custom installation.\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eRated response is 22-200 Hz ±3 dB with roll-off at 20 Hz. Three Room Adaptation curves compensate for boundary gain from centre-wall, near-corner or corner placement, making behaviour more predictable in a dedicated room.\u003c\/p\u003e\n\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eThe amplifier provides left\/right RCA inputs and outputs, volume adjustment, continuous phase and a 60-200 Hz crossover. Its 1U format supports 19-inch rack mounting, leaving C15S hidden behind the screen or structure while the electronics remain accessible.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eC15S weighs 32.5 kg and includes hardware for floor fixing and stacking multiple cabinets. The solution therefore supports both single-sub use and professional multi-sub installations where shallow depth and secure mechanical fixing are important.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692478046397,"sku":"","price":3567.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-c15s-va500-blue-zhyuz.jpg?v=1789132975"},{"product_id":"subwoofer-mk-sound-sub-x10-1","title":"MK Sound SUB X10+","description":"\u003ch2\u003eDual 10-inch Push-Pull design for deep bass with lower distortion\u003c\/h2\u003e\n\u003cp\u003eMK Sound X10+ is a sealed THX subwoofer with dual 10-inch drivers in Push-Pull configuration, 20-200 Hz response and 500 W RMS \/ 1000 W peak amplification.\u003c\/p\u003e\n\u003cp\u003eThe X+ Series uses MK Sound's established non-isobaric Push-Pull architecture: both drivers are exposed to room air and one is mounted inverted relative to the other. X10+ weighs 40.1 kg and uses a 25 mm MDF cabinet with internal bracing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 10-inch long-throw drivers.\u003c\/li\u003e\n\u003cli\u003eProprietary non-isobaric Push-Pull configuration.\u003c\/li\u003e\n\u003cli\u003eCarbon-fibre cones.\u003c\/li\u003e\n\u003cli\u003e20-200 Hz response.\u003c\/li\u003e\n\u003cli\u003e500 W RMS \/ 1000 W peak amplifier.\u003c\/li\u003e\n\u003cli\u003eRCA and XLR inputs and outputs.\u003c\/li\u003e\n\u003cli\u003eHeadroom Limiter Maximizer and THX 80 Hz filter.\u003c\/li\u003e\n\u003cli\u003eSealed 25 mm MDF cabinet in Black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eNew carbon-fibre cones increase rigidity and strength to handle greater power and excursion. CNC-machined extruded-aluminium Distortion Killer rings control the motor field; increased venting at the woofer bases reduces turbulence and non-linearity at high excursion.\u003c\/p\u003e\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eThe amplifier delivers 500 W RMS and 1000 W peak. The dual-driver layout provides substantial radiating area, while Headroom Limiter Maximizer supervises dynamic excursion to maintain control during very high-output passages.\u003c\/p\u003e\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eRated response is 20-200 Hz. Push-Pull uses one inverted driver to cancel part of the mechanical non-linearity and produce more symmetrical waveforms, reducing distortion as the subwoofer reaches into the lowest octaves.\u003c\/p\u003e\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eLine-level inputs and outputs are provided on both RCA and XLR, together with variable low-pass filtering, bypass, a fixed 80 Hz THX-reference filter and continuous 0-180-degree phase. This supports both home cinema processors and balanced or unbalanced stereo preamplifiers.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe cabinet measures 64.7 x 40 x 34 cm and weighs 40.1 kg. 25 mm MDF panels, internal bracing and a recessed baffle limit vibration and resonance; milled cavities at the base aid airflow and also act as carrying grips for such a heavy subwoofer. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692478079165,"sku":"","price":5336.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-sub-x10-yjyrg.jpg?v=1789373707"},{"product_id":"subwoofer-mk-sound-sub-x12-1","title":"MK Sound SUB X12+","description":"\u003ch2\u003eDual 12-inch Push-Pull design for deep bass with lower distortion\u003c\/h2\u003e\n\u003cp\u003eMK Sound X12+ is a sealed THX subwoofer with dual 12-inch drivers in Push-Pull configuration, 18-200 Hz response and 600 W RMS \/ 1200 W peak amplification.\u003c\/p\u003e\n\u003cp\u003eThe X+ Series uses MK Sound's established non-isobaric Push-Pull architecture: both drivers are exposed to room air and one is mounted inverted relative to the other. X12+ weighs 45.9 kg and uses a 25 mm MDF cabinet with internal bracing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 12-inch long-throw drivers.\u003c\/li\u003e\n\u003cli\u003eProprietary non-isobaric Push-Pull configuration.\u003c\/li\u003e\n\u003cli\u003eCarbon-fibre cones.\u003c\/li\u003e\n\u003cli\u003e18-200 Hz response.\u003c\/li\u003e\n\u003cli\u003e600 W RMS \/ 1200 W peak amplifier.\u003c\/li\u003e\n\u003cli\u003eRCA and XLR inputs and outputs.\u003c\/li\u003e\n\u003cli\u003eHeadroom Limiter Maximizer and THX 80 Hz filter.\u003c\/li\u003e\n\u003cli\u003eSealed 25 mm MDF cabinet in Black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eNew carbon-fibre cones increase rigidity and strength to handle greater power and excursion. CNC-machined extruded-aluminium Distortion Killer rings control the motor field; increased venting at the woofer bases reduces turbulence and non-linearity at high excursion.\u003c\/p\u003e\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eThe amplifier delivers 600 W RMS and 1200 W peak. The dual-driver layout provides substantial radiating area, while Headroom Limiter Maximizer supervises dynamic excursion to maintain control during very high-output passages.\u003c\/p\u003e\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eRated response is 18-200 Hz. Push-Pull uses one inverted driver to cancel part of the mechanical non-linearity and produce more symmetrical waveforms, reducing distortion as the subwoofer reaches into the lowest octaves.\u003c\/p\u003e\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eLine-level inputs and outputs are provided on both RCA and XLR, together with variable low-pass filtering, bypass, a fixed 80 Hz THX-reference filter and continuous 0-180-degree phase. This supports both home cinema processors and balanced or unbalanced stereo preamplifiers.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe cabinet measures 72.8 x 45 x 38.5 cm and weighs 45.9 kg. 25 mm MDF panels, internal bracing and a recessed baffle limit vibration and resonance; milled cavities at the base aid airflow and also act as carrying grips for such a heavy subwoofer. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692478111933,"sku":"","price":6057.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-sub-x12-ztznb.jpg?v=1789133417"},{"product_id":"subwoofer-mk-sound-sub-x15","title":"MK Sound SUB X15+","description":"\u003ch2\u003eDual 15-inch Push-Pull design for deep bass with lower distortion\u003c\/h2\u003e\n\u003cp\u003eMK Sound X15+ is a sealed THX subwoofer with dual 15-inch drivers in Push-Pull configuration, 16-200 Hz response and 700 W RMS \/ 1400 W peak amplification.\u003c\/p\u003e\n\u003cp\u003eThe X+ Series uses MK Sound's established non-isobaric Push-Pull architecture: both drivers are exposed to room air and one is mounted inverted relative to the other. X15+ weighs 61.1 kg and uses a 25 mm MDF cabinet with internal bracing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 15-inch long-throw drivers.\u003c\/li\u003e\n\u003cli\u003eProprietary non-isobaric Push-Pull configuration.\u003c\/li\u003e\n\u003cli\u003eCarbon-fibre cones.\u003c\/li\u003e\n\u003cli\u003e16-200 Hz response.\u003c\/li\u003e\n\u003cli\u003e700 W RMS \/ 1400 W peak amplifier.\u003c\/li\u003e\n\u003cli\u003eRCA and XLR inputs and outputs.\u003c\/li\u003e\n\u003cli\u003eHeadroom Limiter Maximizer and THX 80 Hz filter.\u003c\/li\u003e\n\u003cli\u003eSealed 25 mm MDF cabinet in Black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDesign and drivers\u003c\/h3\u003e\n\u003cp\u003eNew carbon-fibre cones increase rigidity and strength to handle greater power and excursion. CNC-machined extruded-aluminium Distortion Killer rings control the motor field; increased venting at the woofer bases reduces turbulence and non-linearity at high excursion.\u003c\/p\u003e\n\u003ch3\u003eAmplification and performance\u003c\/h3\u003e\n\u003cp\u003eThe amplifier delivers 700 W RMS and 1400 W peak. The dual-driver layout provides substantial radiating area, while Headroom Limiter Maximizer supervises dynamic excursion to maintain control during very high-output passages.\u003c\/p\u003e\n\u003ch3\u003eSystem integration\u003c\/h3\u003e\n\u003cp\u003eRated response is 16-200 Hz. Push-Pull uses one inverted driver to cancel part of the mechanical non-linearity and produce more symmetrical waveforms, reducing distortion as the subwoofer reaches into the lowest octaves.\u003c\/p\u003e\n\u003ch3\u003eControls and connections\u003c\/h3\u003e\n\u003cp\u003eLine-level inputs and outputs are provided on both RCA and XLR, together with variable low-pass filtering, bypass, a fixed 80 Hz THX-reference filter and continuous 0-180-degree phase. This supports both home cinema processors and balanced or unbalanced stereo preamplifiers.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe cabinet measures 83.3 x 51.5 x 46 cm and weighs 61.1 kg. 25 mm MDF panels, internal bracing and a recessed baffle limit vibration and resonance; milled cavities at the base aid airflow and also act as carrying grips for such a heavy subwoofer. The design remains consistent with the MK Sound satellite\/subwoofer philosophy, separating deep bass from the monitor workload to reduce interference and preserve clarity through the mid and high frequencies.\u003c\/p\u003e\n","brand":"MK Sound","offers":[{"title":"Default Title","offer_id":41692478144701,"sku":"","price":7676.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mk-sound-sub-x15-z9q8o.jpg?v=1789132512"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/collections\/sandy-kawadkar-i-FJ4obOoyM-unsplash.jpg?v=1649678938","url":"https:\/\/videosell.it\/en\/collections\/diffusori-acustici.oembed?page=29","provider":"Videosell store","version":"1.0","type":"link"}